[PATCH v7 2/2] phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support

[Guenter Roeck]

On Wed, May 29, 2024 at 02:02:45PM +0800, Richard Zhu wrote:
> Add i.MX8QM HSIO PHY driver support.
> 
> i.MX8QM HSIO has three lane PHY instances, and can be bound to the
> following controllers in the different use cases listed in below table.
> - two lanes capable PCIEA controller.
> - one lane PCIEB controller.
> - AHCI SATA controller.
> 
> i.MX8QM HSIO PHYs support the following use cases.
> +----------------------------------------------------+
> |                               | Lane0| Lane1| Lane2|
> |-------------------------------|------|------|------|
> | use case 1: PCIEAX2SATA       | PCIEA| PCIEA| SATA |
> |-------------------------------|------|------|------|
> | use case 2: PCIEAX2PCIEB      | PCIEA| PCIEA| PCIEB|
> |-------------------------------|------|------|------|
> | use case 3: PCIEAPCIEBSATA    | PCIEA| PCIEB| SATA |
> +----------------------------------------------------+
> 
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> Reviewed-by: Frank Li <Frank.Li at nxp.com>

Building alpha:allmodconfig ... failed
--------------
Error log:
drivers/phy/freescale/phy-fsl-imx8qm-hsio.c: In function 'imx_hsio_set_mode':
drivers/phy/freescale/phy-fsl-imx8qm-hsio.c:459:15: error: implicit declaration of function 'FIELD_PREP'

Guenter