[PATCH v3 3/5] arm64: dts: qcom: sm8450: drop second clock name from clock-output-names

[Neil Armstrong]

On 14/06/2024 12:18, Dmitry Baryshkov wrote:
> There is no need to specify exact name for the second (AUX) output
> clock. It has never been used for the lookups based on the system
> clock name. The driver generates it on its own, in order to remain
> compatible with the older DT. Drop the clock name.
> 
> Fixes: e76862840660 ("arm64: dts: qcom: sm8450: correct pcie1 phy clocks inputs to gcc")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 1e762cc8085a..9bafb3b350ff 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -2087,7 +2087,7 @@ pcie1_phy: phy at 1c0e000 {
>   				      "rchng",
>   				      "pipe";
>   
> -			clock-output-names = "pcie_1_pipe_clk", "pcie_1_phy_aux_clk";
> +			clock-output-names = "pcie_1_pipe_clk";
>   			#clock-cells = <1>;
>   
>   			#phy-cells = <0>;
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>