[PATCH v3 3/5] arm64: dts: qcom: sm8450: drop second clock name from clock-output-names

[Dmitry Baryshkov]

There is no need to specify exact name for the second (AUX) output
clock. It has never been used for the lookups based on the system
clock name. The driver generates it on its own, in order to remain
compatible with the older DT. Drop the clock name.

Fixes: e76862840660 ("arm64: dts: qcom: sm8450: correct pcie1 phy clocks inputs to gcc")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1e762cc8085a..9bafb3b350ff 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2087,7 +2087,7 @@ pcie1_phy: phy at 1c0e000 {
 				      "rchng",
 				      "pipe";
 
-			clock-output-names = "pcie_1_pipe_clk", "pcie_1_phy_aux_clk";
+			clock-output-names = "pcie_1_pipe_clk";
 			#clock-cells = <1>;
 
 			#phy-cells = <0>;

-- 
2.39.2