[PATCH 0/2] phy: qcom: qmp-pcie: Update PCIe PHY settings for SM8550

[neil.armstrong at linaro.org]

On 25/01/2024 03:59, Qiang Yu wrote:
> 
> On 1/24/2024 4:58 PM, neil.armstrong at linaro.org wrote:
>> On 28/12/2023 06:42, Qiang Yu wrote:
>>> Align PCIe0/PCIe1 PHY settings with SM8550 latest PCIe PHY Hardware
>>> Programming Guide.
>>>
>>> Can Guo (1):
>>>    phy: qcom: qmp-pcie: Update PCIe1 PHY settings for SM8550
>>>
>>> Qiang Yu (1):
>>>    phy: qcom: qmp-pcie: Update PCIe0 PHY settings for SM8550
>>>
>>>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c             | 20 ++++++++++++++------
>>>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h      |  2 ++
>>>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h   |  2 ++
>>>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h        |  1 +
>>>   .../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h   |  2 ++
>>>   5 files changed, 21 insertions(+), 6 deletions(-)
>>>
>>
>> - On SM8550-HDK:
>> # lspci
>> 0000:00:00.0 PCI bridge: Qualcomm Device 0113
>> 0000:01:00.0 Network controller: Qualcomm Device 1107 (rev 01)
>> 0001:00:00.0 PCI bridge: Qualcomm Device 0113
>> 0001:01:00.0 Non-Volatile memory controller: Phison Electronics Corporation E12 NVMe Controller (rev 01)
>>
>>
>> # lspci -nvv
>> 0000:00:00.0 0604: 17cb:0113 (prog-if 00 [Normal decode])
>>         LnkCap:    Port #0, Speed 8GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <4us, L1 <8us
>>         LnkSta:    Speed 5GT/s, Width x2
>> 0001:00:00.0 0604: 17cb:0113 (prog-if 00 [Normal decode])
>>         LnkCap:    Port #0, Speed 16GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <4us, L1 <8us
>>         LnkSta:    Speed 8GT/s, Width x2
>>
>> Tested-by: Neil Armstrong <neil.armstrong at linaro.org> # on SM8550-HDK
>>
>> - On SM8550-QRD:
>> # lspci
>> 00:00.0 PCI bridge: Qualcomm Device 0113
>> 01:00.0 Network controller: Qualcomm Device 1107 (rev 01)
>>
>> # lspci -nvv
>>         LnkCap:    Port #0, Speed 8GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <4us, L1 <8us
>>         LnkSta:    Speed 5GT/s, Width x2
>>
>> Tested-by: Neil Armstrong <neil.armstrong at linaro.org> # on SM8550-QRD
>>
>> Thanks,
>> Neil
> 
> Hi Neil,
> 
> Thanks for testing this patch. I verified on aim300, did not see speed downgrade. Let me have a try on HDK8550.

I haven't seen speed downgrade either on the HDK8550

Neil

> 
> Thanks,
> Qiang
>