[PATCH 0/2] phy: qcom: qmp-pcie: Update PCIe PHY settings for SM8550

[Qiang Yu]

On 1/24/2024 4:58 PM, neil.armstrong at linaro.org wrote:
> On 28/12/2023 06:42, Qiang Yu wrote:
>> Align PCIe0/PCIe1 PHY settings with SM8550 latest PCIe PHY Hardware
>> Programming Guide.
>>
>> Can Guo (1):
>>    phy: qcom: qmp-pcie: Update PCIe1 PHY settings for SM8550
>>
>> Qiang Yu (1):
>>    phy: qcom: qmp-pcie: Update PCIe0 PHY settings for SM8550
>>
>>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c             | 20 
>> ++++++++++++++------
>>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h      |  2 ++
>>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h   |  2 ++
>>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h        |  1 +
>>   .../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h   |  2 ++
>>   5 files changed, 21 insertions(+), 6 deletions(-)
>>
>
> - On SM8550-HDK:
> # lspci
> 0000:00:00.0 PCI bridge: Qualcomm Device 0113
> 0000:01:00.0 Network controller: Qualcomm Device 1107 (rev 01)
> 0001:00:00.0 PCI bridge: Qualcomm Device 0113
> 0001:01:00.0 Non-Volatile memory controller: Phison Electronics 
> Corporation E12 NVMe Controller (rev 01)
>
>
> # lspci -nvv
> 0000:00:00.0 0604: 17cb:0113 (prog-if 00 [Normal decode])
>         LnkCap:    Port #0, Speed 8GT/s, Width x2, ASPM L0s L1, Exit 
> Latency L0s <4us, L1 <8us
>         LnkSta:    Speed 5GT/s, Width x2
> 0001:00:00.0 0604: 17cb:0113 (prog-if 00 [Normal decode])
>         LnkCap:    Port #0, Speed 16GT/s, Width x2, ASPM L0s L1, Exit 
> Latency L0s <4us, L1 <8us
>         LnkSta:    Speed 8GT/s, Width x2
>
> Tested-by: Neil Armstrong <neil.armstrong at linaro.org> # on SM8550-HDK
>
> - On SM8550-QRD:
> # lspci
> 00:00.0 PCI bridge: Qualcomm Device 0113
> 01:00.0 Network controller: Qualcomm Device 1107 (rev 01)
>
> # lspci -nvv
>         LnkCap:    Port #0, Speed 8GT/s, Width x2, ASPM L0s L1, Exit 
> Latency L0s <4us, L1 <8us
>         LnkSta:    Speed 5GT/s, Width x2
>
> Tested-by: Neil Armstrong <neil.armstrong at linaro.org> # on SM8550-QRD
>
> Thanks,
> Neil

Hi Neil,

Thanks for testing this patch. I verified on aim300, did not see speed 
downgrade. Let me have a try on HDK8550.

Thanks,
Qiang