[PATCH V8 02/12] phy: freescale: add Samsung HDMI PHY

Mon Feb 5 00:17:19 PST 2024

On 24-02-04, Dmitry Baryshkov wrote:
> On Sat, 3 Feb 2024 at 17:53, Adam Ford <aford173 at gmail.com> wrote:
> >
> > From: Lucas Stach <l.stach at pengutronix.de>
> >
> > This adds the driver for the Samsung HDMI PHY found on the
> > i.MX8MP SoC.
> >
> > Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> > ---
> > V4:  Make lookup table hex values lower case.
> >
> > V3:  Re-order the Makefile to keep it alphabetical
> >      Remove unused defines
> >
> > V2:  Fixed some whitespace found from checkpatch
> >      Change error handling when enabling apbclk to use dev_err_probe
> >      Rebase on Linux-Next
> >
> >      I (Adam) tried to help move this along, so I took Lucas' patch and
> >      attempted to apply fixes based on feedback.  I don't have
> >      all the history, so apologies for that.
> > ---
> >  drivers/phy/freescale/Kconfig                |    6 +
> >  drivers/phy/freescale/Makefile               |    1 +
> >  drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 1075 ++++++++++++++++++
> >  3 files changed, 1082 insertions(+)
> >  create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> >
> > diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> > index 853958fb2c06..5c2b73042dfc 100644
> > --- a/drivers/phy/freescale/Kconfig
> > +++ b/drivers/phy/freescale/Kconfig
> > @@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
> >           Enable this to add support for the PCIE PHY as found on
> >           i.MX8M family of SOCs.
> >
> > +config PHY_FSL_SAMSUNG_HDMI_PHY
> > +       tristate "Samsung HDMI PHY support"
> > +       depends on OF && HAS_IOMEM
> > +       help
> > +         Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
> > +
> >  endif
> >
> >  config PHY_FSL_LYNX_28G
> > diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
> > index cedb328bc4d2..79e5f16d3ce8 100644
> > --- a/drivers/phy/freescale/Makefile
> > +++ b/drivers/phy/freescale/Makefile
> > @@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY)        += phy-fsl-imx8qm-lvds-phy.o
> >  obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)      += phy-fsl-imx8-mipi-dphy.o
> >  obj-$(CONFIG_PHY_FSL_IMX8M_PCIE)       += phy-fsl-imx8m-pcie.o
> >  obj-$(CONFIG_PHY_FSL_LYNX_28G)         += phy-fsl-lynx-28g.o
> > +obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY)  += phy-fsl-samsung-hdmi.o
> > diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> > new file mode 100644
> > index 000000000000..bf0e2299d00f
> > --- /dev/null
> > +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> > @@ -0,0 +1,1075 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2020 NXP
> > + * Copyright 2022 Pengutronix, Lucas Stach <kernel at pengutronix.de>
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +
> > +#define PHY_REG_33             0x84
> > +#define  REG33_MODE_SET_DONE   BIT(7)
> > +#define  REG33_FIX_DA          BIT(1)
> > +
> > +#define PHY_REG_34             0x88
> > +#define  REG34_PHY_READY       BIT(7)
> > +#define  REG34_PLL_LOCK                BIT(6)
> > +#define  REG34_PHY_CLK_READY   BIT(5)
> > +
> > +
> > +#define PHY_PLL_REGS_NUM 48
> > +
> > +struct phy_config {
> > +       u32     clk_rate;
> > +       u8 regs[PHY_PLL_REGS_NUM];
> > +};
> > +
> > +const struct phy_config phy_pll_cfg[] = {
> > +       {       22250000, {
> > +                       0x00, 0xd1, 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40,
> > +                       0x4f, 0x30, 0x33, 0x65, 0x00, 0x15, 0x25, 0x80,
> > +                       0x6c, 0xf2, 0x67, 0x00, 0x10, 0x8f, 0x30, 0x32,
> > +                       0x60, 0x8f, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00,
> > +                       0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                       0x00, 0xe0, 0x83, 0x0f, 0x3e, 0xf8, 0x00, 0x00,
> > +               },
> > +       }, {
> > +               23750000, {
> > +                       0x00, 0xd1, 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40,
> > +                       0x4f, 0x30, 0x33, 0x65, 0x00, 0x03, 0x25, 0x80,
> > +                       0x6c, 0xf2, 0x67, 0x00, 0x10, 0x8f, 0x30, 0x32,
> > +                       0x60, 0x8f, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00,
> > +                       0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                       0x00, 0xe0, 0x83, 0x0f, 0x3e, 0xf8, 0x00, 0x00,
> > +               },
> 
> Generally I see that these entries contain a high level of duplication.
> Could you please extract the common part and a rate-dependent part.
> Next, it would be best if instead of writing the register values via
> the rate LUT, the driver could calculate those values.
> This allows us to support other HDMI modes if the need arises at some point.

Hi Adam,

can you please have a look at: https://lore.kernel.org/all/4830698.GXAFRqVoOG@steina-w/

there we have fixed this already. Not sure which version you picked for
your work.

Regards,
  Marco

> 
> > +       }, {
> > +               24000000, {
> > +                       0x00, 0xd1, 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00,
> > +                       0x4f, 0x30, 0x33, 0x65, 0x00, 0x01, 0x25, 0x80,
> > +                       0x6c, 0xf2, 0x67, 0x00, 0x10, 0x8f, 0x30, 0x32,
> > +                       0x60, 0x8f, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00,
> > +                       0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                       0x00, 0xe0, 0x83, 0x0f, 0x3e, 0xf8, 0x00, 0x00,
> > +               },
> 
> 
> -- 
> With best wishes
> Dmitry
> 
> 