[PATCH 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY

Neil Armstrong neil.armstrong at linaro.org
Mon Mar 27 00:59:34 PDT 2023


On 24/03/2023 22:55, Dmitry Baryshkov wrote:
> The first USB PHY on the sm8150 platform is really the USB+DP combo
> PHY. Add the DP part of the PHY.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8150.dtsi | 17 +++++++++++++----
>   1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 9491be4a6bf0..a618218f7b68 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3392,20 +3392,19 @@ usb_2_hsphy: phy at 88e3000 {
>   		};
>   
>   		usb_1_qmpphy: phy at 88e9000 {
> -			compatible = "qcom,sm8150-qmp-usb3-phy";
> +			compatible = "qcom,sm8150-qmp-usb3-dp-phy";
>   			reg = <0 0x088e9000 0 0x18c>,
> -			      <0 0x088e8000 0 0x10>;
> +			      <0 0x088e8000 0 0x38>,
> +			      <0 0x088ea000 0 0x40>;
>   			status = "disabled";
>   			#address-cells = <2>;
>   			#size-cells = <2>;
>   			ranges;
> -
>   			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
>   				 <&rpmhcc RPMH_CXO_CLK>,
>   				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
>   				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
>   			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
> -
>   			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
>   				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
>   			reset-names = "phy", "common";
> @@ -3423,6 +3422,16 @@ usb_1_ssphy: phy at 88e9200 {
>   				clock-names = "pipe0";
>   				clock-output-names = "usb3_phy_pipe_clk_src";
>   			};
> +
> +			usb_1_dpphy: phy at 88ea200 {
> +				reg = <0 0x088ea200 0 0x200>,
> +				      <0 0x088ea400 0 0x200>,
> +				      <0 0x088eaa00 0 0x200>,
> +				      <0 0x088ea600 0 0x200>,
> +				      <0 0x088ea800 0 0x200>;
> +				#clock-cells = <1>;
> +				#phy-cells = <0>;
> +			};

Is there a reason why the new flat bindings from qcom,sc8280xp-qmp-usb43dp-phy.yaml are not used instead ?

Neil

>   		};
>   
>   		usb_2_qmpphy: phy at 88eb000 {




More information about the linux-phy mailing list