[PATCH 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY

[Dmitry Baryshkov]

The first USB PHY on the sm8150 platform is really the USB+DP combo
PHY. Add the DP part of the PHY.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 9491be4a6bf0..a618218f7b68 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3392,20 +3392,19 @@ usb_2_hsphy: phy at 88e3000 {
 		};
 
 		usb_1_qmpphy: phy at 88e9000 {
-			compatible = "qcom,sm8150-qmp-usb3-phy";
+			compatible = "qcom,sm8150-qmp-usb3-dp-phy";
 			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x10>;
+			      <0 0x088e8000 0 0x38>,
+			      <0 0x088ea000 0 0x40>;
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
-
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
 				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
 			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
@@ -3423,6 +3422,16 @@ usb_1_ssphy: phy at 88e9200 {
 				clock-names = "pipe0";
 				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
+
+			usb_1_dpphy: phy at 88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
 		};
 
 		usb_2_qmpphy: phy at 88eb000 {
-- 
2.30.2