[PATCH v1 6/6] arm64: dts: qcom: sa8775p-ride: enable pcie nodes

[Konrad Dybcio]

On 5.07.2023 10:17, Mrinmay Sarkar wrote:
> Enable pcie0, pcie1 nodes and their respective phy's.
> 
> Signed-off-by: Mrinmay Sarkar <quic_msarkar at quicinc.com>
> ---
grep for '&[a-z0-9]\{' and please fix all missing spaces before the
opening braces.

Konrad
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 68 +++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index ab767cfa51ff..4a39294259fe 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -443,6 +443,74 @@ qup_uart17_rx: qup0-uart17-rx-pins {
>  			bias-pull-down;
>  		};
>  	};
> +
> +	pcie0_default_state: pcie0-default {
> +		perst {
> +			pins = "gpio2";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-down;
> +		};
> +
> +		clkreq {
> +			pins = "gpio1";
> +			function = "pcie0_clkreq";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		wake {
> +			pins = "gpio0";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +	};
> +
> +	pcie1_default_state: pcie1-default {
> +		perst {
> +			pins = "gpio4";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-down;
> +		};
> +
> +		clkreq {
> +			pins = "gpio3";
> +			function = "pcie1_clkreq";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		wake {
> +			pins = "gpio5";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +	};
> +};
> +
> +&pcie0{
> +	status = "okay";
> +};
> +
> +&pcie1{
> +	status = "okay";
> +};
> +
> +&pcie0_phy{
> +	vdda-phy-supply = <&vreg_l5a>;
> +	vdda-pll-supply = <&vreg_l1c>;
> +
> +	status = "okay";
> +};
> +
> +&pcie1_phy{
> +	vdda-phy-supply = <&vreg_l5a>;
> +	vdda-pll-supply = <&vreg_l1c>;
> +
> +	status = "okay";
>  };
>  
>  &uart10 {