[PATCH v1 6/6] arm64: dts: qcom: sa8775p-ride: enable pcie nodes

[Krzysztof Kozlowski]

On 05/07/2023 10:17, Mrinmay Sarkar wrote:
> Enable pcie0, pcie1 nodes and their respective phy's.
> 
> Signed-off-by: Mrinmay Sarkar <quic_msarkar at quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 68 +++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index ab767cfa51ff..4a39294259fe 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -443,6 +443,74 @@ qup_uart17_rx: qup0-uart17-rx-pins {
>  			bias-pull-down;
>  		};
>  	};
> +
> +	pcie0_default_state: pcie0-default {
> +		perst {

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Best regards,
Krzysztof