[PATCH v2 08/13] ARM: dts: qcom: sdx55: List the property values vertically

Manivannan Sadhasivam manivannan.sadhasivam at linaro.org
Fri Feb 24 02:59:01 PST 2023


To align with the rest of the devicetree files and the relative properties,
let's list the values of properties such as {reg/clock/interrupt}-names
vertically.

Suggested-by: Konrad Dybcio <konrad.dybcio at linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
---
 arch/arm/boot/dts/qcom-sdx55.dtsi | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index b411c4ae34c3..61fdd601fc26 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -393,7 +393,11 @@ pcie_ep: pcie-ep at 1c00000 {
 			      <0x40001000 0x1000>,
 			      <0x40200000 0x100000>,
 			      <0x01c03000 0x3000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
 				    "mmio";
 
 			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
@@ -405,12 +409,18 @@ pcie_ep: pcie-ep at 1c00000 {
 				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
 				 <&gcc GCC_PCIE_SLEEP_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
-			clock-names = "aux", "cfg", "bus_master", "bus_slave",
-				      "slave_q2a", "sleep", "ref";
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep",
+				      "ref";
 
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global", "doorbell";
+			interrupt-names = "global",
+					  "doorbell";
 			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
 			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
 			resets = <&gcc GCC_PCIE_BCR>;
@@ -434,7 +444,10 @@ pcie_phy: phy at 1c07000 {
 				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
 				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
 
 			resets = <&gcc GCC_PCIE_PHY_BCR>;
 			reset-names = "phy";
-- 
2.25.1




More information about the linux-phy mailing list