[PATCH 2/7] PCI: qcom: Add IPQ9574 PCIe support
Kathiravan T
quic_kathirav at quicinc.com
Mon Feb 20 06:51:53 PST 2023
On 2/20/2023 7:11 PM, Devi Priya wrote:
> Hi Sri,
> Thanks for taking time to review the patch!
>
> On 2/16/2023 5:08 PM, Sricharan Ramabadhran wrote:
>> Hi Devi,
>>
>> On 2/14/2023 10:11 PM, Devi Priya wrote:
>>> Adding PCIe support for IPQ9574 SoC
>>>
>>> Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
>>> Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
>>> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>>> ---
>>> drivers/pci/controller/dwc/pcie-qcom.c | 119
>>> +++++++++++++++++++++++++
>>> 1 file changed, 119 insertions(+)
>>>
>>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
>>> b/drivers/pci/controller/dwc/pcie-qcom.c
>>> index a232b04af048..57606c113d45 100644
>>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
>>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
>>> @@ -193,6 +193,12 @@ struct qcom_pcie_resources_2_9_0 {
>>> struct reset_control *rst;
>>> };
>>> +struct qcom_pcie_resources_1_27_0 {
>>> + struct clk_bulk_data *clks;
>>> + struct reset_control *rst;
>>> + int num_clks;
>>> +};
>>> +
>>> union qcom_pcie_resources {
>>> struct qcom_pcie_resources_1_0_0 v1_0_0;
>>> struct qcom_pcie_resources_2_1_0 v2_1_0;
>>> @@ -201,6 +207,7 @@ union qcom_pcie_resources {
>>> struct qcom_pcie_resources_2_4_0 v2_4_0;
>>> struct qcom_pcie_resources_2_7_0 v2_7_0;
>>> struct qcom_pcie_resources_2_9_0 v2_9_0;
>>> + struct qcom_pcie_resources_1_27_0 v1_27_0;
>>> };
>>> struct qcom_pcie;
>>> @@ -1409,6 +1416,104 @@ static int qcom_pcie_post_init_2_9_0(struct
>>> qcom_pcie *pcie)
>>> return 0;
>>> }
>>> +static int qcom_pcie_get_resources_1_27_0(struct qcom_pcie *pcie)
>>> +{
>>> + struct qcom_pcie_resources_1_27_0 *res = &pcie->res.v1_27_0;
>>> + struct dw_pcie *pci = pcie->pci;
>>> + struct device *dev = pci->dev;
>>> +
>>> + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks);
>>> + if (res->clks < 0)
>>> + return res->num_clks;
>>> +
>>> + res->rst = devm_reset_control_array_get_exclusive(dev);
>>> + if (IS_ERR(res->rst))
>>> + return PTR_ERR(res->rst);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void qcom_pcie_deinit_1_27_0(struct qcom_pcie *pcie)
>>> +{
>>> + struct qcom_pcie_resources_1_27_0 *res = &pcie->res.v1_27_0;
>>> +
>>> + clk_bulk_disable_unprepare(res->num_clks, res->clks);
>>> +}
>>> +
>>> +static int qcom_pcie_init_1_27_0(struct qcom_pcie *pcie)
>>> +{
>>> + struct qcom_pcie_resources_1_27_0 *res = &pcie->res.v1_27_0;
>>> + struct device *dev = pcie->pci->dev;
>>> + int ret;
>>> +
>>> + ret = reset_control_assert(res->rst);
>>> + if (ret) {
>>> + dev_err(dev, "reset assert failed (%d)\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + /*
>>> + * Delay periods before and after reset deassert are working
>>> values
>>> + * from downstream Codeaurora kernel
>>> + */
>>> + usleep_range(2000, 2500);
>>> +
>>> + ret = reset_control_deassert(res->rst);
>>> + if (ret) {
>>> + dev_err(dev, "reset deassert failed (%d)\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + usleep_range(2000, 2500);
>>> +
>>> + return clk_bulk_prepare_enable(res->num_clks, res->clks);
>>> +}
>>> +
>>> +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie)
>>> +{
>>> + struct dw_pcie *pci = pcie->pci;
>>> + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>>> + u32 val;
>>> + int i;
>>> +
>>> + writel(0x8000000, pcie->parf +
>>> PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
Devi,
Above statement also differs. You need to consider this also when you
use the 2_9_0 ops.
Thanks,
>>> +
>>> + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
>>> + val &= ~BIT(0);
>>> + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
>>> +
>>> + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
>>> +
>>> + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
>>> + writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN,
>>> + pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
>>> + writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS |
>>> + GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL,
>>> + pci->dbi_base + GEN3_RELATED_OFF);
>>> +
>>> + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS |
>>> + SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
>>> + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS,
>>> + pcie->parf + PCIE20_PARF_SYS_CTRL);
>>> +
>>> + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
>>> +
>>> + dw_pcie_dbi_ro_wr_en(pci);
>>> + writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset +
>>> PCI_EXP_SLTCAP);
>>> +
>>> + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
>>> + val &= ~PCI_EXP_LNKCAP_ASPMS;
>>> + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
>>> +
>>> + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
>>> + PCI_EXP_DEVCTL2);
>>> +
>>> + for (i = 0; i < 256; i++)
>>> + writel(0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + (4
>>> * i));
>>> +
>>> + return 0;
>>> +}
>>> +
>>> static int qcom_pcie_link_up(struct dw_pcie *pci)
>>> {
>>> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>>> @@ -1620,6 +1725,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
>>> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>>> };
>>> +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */
>>> +static const struct qcom_pcie_ops ops_1_27_0 = {
>>> + .get_resources = qcom_pcie_get_resources_1_27_0,
>>> + .init = qcom_pcie_init_1_27_0,
>>> + .post_init = qcom_pcie_post_init_1_27_0,
>>> + .deinit = qcom_pcie_deinit_1_27_0,
>>> + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>>> +};
>>> +
>>> static const struct qcom_pcie_cfg cfg_1_0_0 = {
>>> .ops = &ops_1_0_0,
>>> };
>>> @@ -1652,6 +1766,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = {
>>> .ops = &ops_2_9_0,
>>> };
>>> +static const struct qcom_pcie_cfg cfg_1_27_0 = {
>>> + .ops = &ops_1_27_0,
>>> +};
>>> +
>>> static const struct dw_pcie_ops dw_pcie_ops = {
>>> .link_up = qcom_pcie_link_up,
>>> .start_link = qcom_pcie_start_link,
>>> @@ -1829,6 +1947,7 @@ static const struct of_device_id
>>> qcom_pcie_match[] = {
>>> { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
>>> { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
>>> { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
>>> + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 },
>>
>> I do not see much difference between 2_9_0 and 1_27_0. Is this patch
>> really required. Can you check if it works with 2_9_0 itself ?
> Yes right Sri, Only the clocks seem to differ between 2_9_0 and 1_27_0.
> Will update 2_9_0 ops to get the clocks from the DT and use the same
> for ipq9574 in the next spin.
>
> Best Regards,
> Devi Priya
>>
>> Regards,
>> Sricharan
More information about the linux-phy
mailing list