[PATCH 2/7] PCI: qcom: Add IPQ9574 PCIe support
Devi Priya
quic_devipriy at quicinc.com
Mon Feb 20 05:41:52 PST 2023
Hi Sri,
Thanks for taking time to review the patch!
On 2/16/2023 5:08 PM, Sricharan Ramabadhran wrote:
> Hi Devi,
>
> On 2/14/2023 10:11 PM, Devi Priya wrote:
>> Adding PCIe support for IPQ9574 SoC
>>
>> Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
>> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>> ---
>> drivers/pci/controller/dwc/pcie-qcom.c | 119 +++++++++++++++++++++++++
>> 1 file changed, 119 insertions(+)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
>> b/drivers/pci/controller/dwc/pcie-qcom.c
>> index a232b04af048..57606c113d45 100644
>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
>> @@ -193,6 +193,12 @@ struct qcom_pcie_resources_2_9_0 {
>> struct reset_control *rst;
>> };
>> +struct qcom_pcie_resources_1_27_0 {
>> + struct clk_bulk_data *clks;
>> + struct reset_control *rst;
>> + int num_clks;
>> +};
>> +
>> union qcom_pcie_resources {
>> struct qcom_pcie_resources_1_0_0 v1_0_0;
>> struct qcom_pcie_resources_2_1_0 v2_1_0;
>> @@ -201,6 +207,7 @@ union qcom_pcie_resources {
>> struct qcom_pcie_resources_2_4_0 v2_4_0;
>> struct qcom_pcie_resources_2_7_0 v2_7_0;
>> struct qcom_pcie_resources_2_9_0 v2_9_0;
>> + struct qcom_pcie_resources_1_27_0 v1_27_0;
>> };
>> struct qcom_pcie;
>> @@ -1409,6 +1416,104 @@ static int qcom_pcie_post_init_2_9_0(struct
>> qcom_pcie *pcie)
>> return 0;
>> }
>> +static int qcom_pcie_get_resources_1_27_0(struct qcom_pcie *pcie)
>> +{
>> + struct qcom_pcie_resources_1_27_0 *res = &pcie->res.v1_27_0;
>> + struct dw_pcie *pci = pcie->pci;
>> + struct device *dev = pci->dev;
>> +
>> + res->num_clks = devm_clk_bulk_get_all(dev, &res->clks);
>> + if (res->clks < 0)
>> + return res->num_clks;
>> +
>> + res->rst = devm_reset_control_array_get_exclusive(dev);
>> + if (IS_ERR(res->rst))
>> + return PTR_ERR(res->rst);
>> +
>> + return 0;
>> +}
>> +
>> +static void qcom_pcie_deinit_1_27_0(struct qcom_pcie *pcie)
>> +{
>> + struct qcom_pcie_resources_1_27_0 *res = &pcie->res.v1_27_0;
>> +
>> + clk_bulk_disable_unprepare(res->num_clks, res->clks);
>> +}
>> +
>> +static int qcom_pcie_init_1_27_0(struct qcom_pcie *pcie)
>> +{
>> + struct qcom_pcie_resources_1_27_0 *res = &pcie->res.v1_27_0;
>> + struct device *dev = pcie->pci->dev;
>> + int ret;
>> +
>> + ret = reset_control_assert(res->rst);
>> + if (ret) {
>> + dev_err(dev, "reset assert failed (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + /*
>> + * Delay periods before and after reset deassert are working values
>> + * from downstream Codeaurora kernel
>> + */
>> + usleep_range(2000, 2500);
>> +
>> + ret = reset_control_deassert(res->rst);
>> + if (ret) {
>> + dev_err(dev, "reset deassert failed (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + usleep_range(2000, 2500);
>> +
>> + return clk_bulk_prepare_enable(res->num_clks, res->clks);
>> +}
>> +
>> +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie)
>> +{
>> + struct dw_pcie *pci = pcie->pci;
>> + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>> + u32 val;
>> + int i;
>> +
>> + writel(0x8000000, pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
>> +
>> + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
>> + val &= ~BIT(0);
>> + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
>> +
>> + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
>> +
>> + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
>> + writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN,
>> + pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
>> + writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS |
>> + GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL,
>> + pci->dbi_base + GEN3_RELATED_OFF);
>> +
>> + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS |
>> + SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
>> + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS,
>> + pcie->parf + PCIE20_PARF_SYS_CTRL);
>> +
>> + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
>> +
>> + dw_pcie_dbi_ro_wr_en(pci);
>> + writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
>> +
>> + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
>> + val &= ~PCI_EXP_LNKCAP_ASPMS;
>> + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
>> +
>> + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
>> + PCI_EXP_DEVCTL2);
>> +
>> + for (i = 0; i < 256; i++)
>> + writel(0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + (4 *
>> i));
>> +
>> + return 0;
>> +}
>> +
>> static int qcom_pcie_link_up(struct dw_pcie *pci)
>> {
>> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>> @@ -1620,6 +1725,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
>> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>> };
>> +/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */
>> +static const struct qcom_pcie_ops ops_1_27_0 = {
>> + .get_resources = qcom_pcie_get_resources_1_27_0,
>> + .init = qcom_pcie_init_1_27_0,
>> + .post_init = qcom_pcie_post_init_1_27_0,
>> + .deinit = qcom_pcie_deinit_1_27_0,
>> + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>> +};
>> +
>> static const struct qcom_pcie_cfg cfg_1_0_0 = {
>> .ops = &ops_1_0_0,
>> };
>> @@ -1652,6 +1766,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = {
>> .ops = &ops_2_9_0,
>> };
>> +static const struct qcom_pcie_cfg cfg_1_27_0 = {
>> + .ops = &ops_1_27_0,
>> +};
>> +
>> static const struct dw_pcie_ops dw_pcie_ops = {
>> .link_up = qcom_pcie_link_up,
>> .start_link = qcom_pcie_start_link,
>> @@ -1829,6 +1947,7 @@ static const struct of_device_id
>> qcom_pcie_match[] = {
>> { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
>> { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
>> { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
>> + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 },
>
> I do not see much difference between 2_9_0 and 1_27_0. Is this patch
> really required. Can you check if it works with 2_9_0 itself ?
Yes right Sri, Only the clocks seem to differ between 2_9_0 and 1_27_0.
Will update 2_9_0 ops to get the clocks from the DT and use the same for
ipq9574 in the next spin.
Best Regards,
Devi Priya
>
> Regards,
> Sricharan
More information about the linux-phy
mailing list