[PATCH v7 2/5] PCI: qcom: Add retry logic for link to be stable in either L1.1 or L1.2

Jeff Johnson quic_jjohnson at quicinc.com
Tue Sep 20 15:00:38 PDT 2022


On 9/20/2022 3:22 AM, Krishna chaitanya chundru wrote:
> When link is in L1ss(L1.1 or L1.2), all the clocks will gate off and there
> will be no activity on the link. At that point clocks and phy
> can be turned off. If clocks got disabled before link enters
> L1ss the PCIe link goes down.
> 
> Few endpoints are taking time more time to settle the link in L1 substates.

"time more time" does not parse

> When we check the traffic in protocol analyzer, we see some DLLP packets
> going on still. So Wait for max time of 200ms for the link to be stable in

s/Wait/wait/

> L1 substates.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai at quicinc.com>
> ---
> changes since v6:
> 	- updated comments.
> ---
>   drivers/pci/controller/dwc/pcie-qcom.c | 46 ++++++++++++++++++++++++++--------
>   1 file changed, 35 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 3f5424a..7a6f69e 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1809,23 +1809,47 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>   static int __maybe_unused qcom_pcie_pm_suspend(struct qcom_pcie *pcie)
>   {
>   	u32 val;
> +	ktime_t timeout, start;
>   	struct dw_pcie *pci = pcie->pci;
>   	struct device *dev = pci->dev;
>   
> -	/* if the link is not active turn off clocks */
> -	if (!dw_pcie_link_up(pci)) {
> -		dev_dbg(dev, "Link is not active\n");
> -		goto suspend;
> -	}
> +	/*
> +	 * When link is in L1ss, all the clocks will gate off and
> +	 * there will be no activity on the link. At that point clocks
> +	 * and phy can be turned off. If clocks got disabled before
> +	 * link enters L1ss the PCIe link goes down.
> +	 *
> +	 * Few endpoints are taking time more time to settle the link

"time more time" does not parse

> +	 * in L1ss. Wait for max of 200ms for the link to be stable in
> +	 * L1ss.
> +	 */
> +	start = ktime_get();
> +	/* Wait max 200 ms */
> +	timeout = ktime_add_ms(start, 200);
> +
> +	while (1) {
> +		/* if the liink is not active turn off clocks */
> +		if (!dw_pcie_link_up(pci)) {
> +			dev_dbg(dev, "Link is not active\n");
> +			break;
> +		}
>   
> -	/* if the link is not in l1ss don't turn off clocks */
> -	val = readl(pcie->parf + PCIE20_PARF_PM_STTS);
> -	if (!(val & PCIE20_PARF_PM_STTS_LINKST_IN_L1SUB)) {
> -		dev_warn(dev, "Link is not in L1ss\n");
> -		return 0;
> +		/* if the link is not in l1ss don't turn off clocks */
> +		val = readl(pcie->parf + PCIE20_PARF_PM_STTS);
> +		if ((val & PCIE20_PARF_PM_STTS_LINKST_IN_L1SUB)) {
> +			dev_dbg(dev, "Link enters L1ss after %lld  ms\n",
> +					ktime_to_ms(ktime_get() - start));
> +			break;
> +		}
> +
> +		if (ktime_after(ktime_get(), timeout)) {
> +			dev_warn(dev, "Link is not in L1ss\n");
> +			return 0;
> +		}
> +
> +		udelay(1000);
>   	}
>   
> -suspend:
>   	if (pcie->cfg->ops->suspend)
>   		pcie->cfg->ops->suspend(pcie);
>   




More information about the linux-phy mailing list