[PATCH 17/17] phy: qcom-qmp-combo: drop redundant DP config flag
Neil Armstrong
neil.armstrong at linaro.org
Tue Sep 20 06:52:23 PDT 2022
On 20/09/2022 09:38, Johan Hovold wrote:
> Drop the DP_COM control block flag from the configuration data, which is
> set for all combo PHYs and hence no longer needed since the QMP driver
> split.
>
> Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 63 +++++++----------------
> 1 file changed, 18 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 417e0fcf1a9f..ad3b0aa22048 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -876,9 +876,6 @@ struct qmp_phy_cfg {
> int pwrdn_delay_min;
> int pwrdn_delay_max;
>
> - /* true, if PHY has a separate DP_COM control block */
> - bool has_phy_dp_com_ctrl;
> -
> /* Offset from PCS to PCS_USB region */
> unsigned int pcs_usb_offset;
>
> @@ -1051,8 +1048,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> .has_pwrdn_delay = true,
> .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> -
> - .has_phy_dp_com_ctrl = true,
> };
>
> static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> @@ -1086,8 +1081,6 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v3_usb3phy_regs_layout,
>
> - .has_phy_dp_com_ctrl = true,
> -
> .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
> .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> @@ -1126,8 +1119,6 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
> .has_pwrdn_delay = true,
> .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> -
> - .has_phy_dp_com_ctrl = true,
> };
>
> static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
> @@ -1166,8 +1157,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> .has_pwrdn_delay = true,
> .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> -
> - .has_phy_dp_com_ctrl = true,
> };
>
> static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> @@ -1201,8 +1190,6 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v3_usb3phy_regs_layout,
>
> - .has_phy_dp_com_ctrl = true,
> -
> .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> @@ -1242,8 +1229,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
> .has_pwrdn_delay = true,
> .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> -
> - .has_phy_dp_com_ctrl = true,
> };
>
> static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
> @@ -1277,8 +1262,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v4_usb3phy_regs_layout,
>
> - .has_phy_dp_com_ctrl = true,
> -
> .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
> @@ -1320,8 +1303,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> .has_pwrdn_delay = true,
> .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> -
> - .has_phy_dp_com_ctrl = true,
> };
>
> static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> @@ -1355,8 +1336,6 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v4_usb3phy_regs_layout,
>
> - .has_phy_dp_com_ctrl = true,
> -
> .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> @@ -1995,28 +1974,25 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
> if (ret)
> goto err_assert_reset;
>
> - if (cfg->has_phy_dp_com_ctrl) {
> - qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
> - SW_PWRDN);
> - /* override hardware control for reset of qmp phy */
> - qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> - SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> - SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL, SW_PWRDN);
>
> - /* Default type-c orientation, i.e CC1 */
> - qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
> + /* override hardware control for reset of qmp phy */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
>
> - qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
> - USB3_MODE | DP_MODE);
> + /* Default type-c orientation, i.e CC1 */
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
>
> - /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> - qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> - SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> - SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL, USB3_MODE | DP_MODE);
>
> - qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> - qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> - }
> + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> +
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
>
> if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
> qphy_setbits(pcs,
> @@ -2838,12 +2814,9 @@ static int qmp_combo_probe(struct platform_device *pdev)
> if (IS_ERR(serdes))
> return PTR_ERR(serdes);
>
> - /* per PHY dp_com; if PHY has dp_com control block */
> - if (cfg->has_phy_dp_com_ctrl) {
> - qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
> - if (IS_ERR(qmp->dp_com))
> - return PTR_ERR(qmp->dp_com);
> - }
> + qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(qmp->dp_com))
> + return PTR_ERR(qmp->dp_com);
>
> /* Only two serdes for combo PHY */
> dp_serdes = devm_platform_ioremap_resource(pdev, 2);
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the linux-phy
mailing list