[PATCH 17/17] phy: qcom-qmp-combo: drop redundant DP config flag

Johan Hovold johan+linaro at kernel.org
Tue Sep 20 00:38:26 PDT 2022


Drop the DP_COM control block flag from the configuration data, which is
set for all combo PHYs and hence no longer needed since the QMP driver
split.

Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 63 +++++++----------------
 1 file changed, 18 insertions(+), 45 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 417e0fcf1a9f..ad3b0aa22048 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -876,9 +876,6 @@ struct qmp_phy_cfg {
 	int pwrdn_delay_min;
 	int pwrdn_delay_max;
 
-	/* true, if PHY has a separate DP_COM control block */
-	bool has_phy_dp_com_ctrl;
-
 	/* Offset from PCS to PCS_USB region */
 	unsigned int pcs_usb_offset;
 
@@ -1051,8 +1048,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
-
-	.has_phy_dp_com_ctrl	= true,
 };
 
 static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
@@ -1086,8 +1081,6 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v3_usb3phy_regs_layout,
 
-	.has_phy_dp_com_ctrl	= true,
-
 	.dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
 	.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
 	.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
@@ -1126,8 +1119,6 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
-
-	.has_phy_dp_com_ctrl	= true,
 };
 
 static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
@@ -1166,8 +1157,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
-
-	.has_phy_dp_com_ctrl	= true,
 };
 
 static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
@@ -1201,8 +1190,6 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v3_usb3phy_regs_layout,
 
-	.has_phy_dp_com_ctrl	= true,
-
 	.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
 	.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
 	.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
@@ -1242,8 +1229,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
-
-	.has_phy_dp_com_ctrl	= true,
 };
 
 static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
@@ -1277,8 +1262,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
 
-	.has_phy_dp_com_ctrl	= true,
-
 	.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
 	.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
 	.configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
@@ -1320,8 +1303,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
-
-	.has_phy_dp_com_ctrl	= true,
 };
 
 static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
@@ -1355,8 +1336,6 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
 
-	.has_phy_dp_com_ctrl	= true,
-
 	.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
 	.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
 	.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
@@ -1995,28 +1974,25 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
 	if (ret)
 		goto err_assert_reset;
 
-	if (cfg->has_phy_dp_com_ctrl) {
-		qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
-			     SW_PWRDN);
-		/* override hardware control for reset of qmp phy */
-		qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
-			     SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
-			     SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+	qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL, SW_PWRDN);
 
-		/* Default type-c orientation, i.e CC1 */
-		qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
+	/* override hardware control for reset of qmp phy */
+	qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+			SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+			SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
 
-		qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
-			     USB3_MODE | DP_MODE);
+	/* Default type-c orientation, i.e CC1 */
+	qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
 
-		/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
-		qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
-			     SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
-			     SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+	qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL, USB3_MODE | DP_MODE);
 
-		qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
-		qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
-	}
+	/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
+	qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+			SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+			SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+	qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
+	qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
 
 	if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
 		qphy_setbits(pcs,
@@ -2838,12 +2814,9 @@ static int qmp_combo_probe(struct platform_device *pdev)
 	if (IS_ERR(serdes))
 		return PTR_ERR(serdes);
 
-	/* per PHY dp_com; if PHY has dp_com control block */
-	if (cfg->has_phy_dp_com_ctrl) {
-		qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
-		if (IS_ERR(qmp->dp_com))
-			return PTR_ERR(qmp->dp_com);
-	}
+	qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(qmp->dp_com))
+		return PTR_ERR(qmp->dp_com);
 
 	/* Only two serdes for combo PHY */
 	dp_serdes = devm_platform_ioremap_resource(pdev, 2);
-- 
2.35.1




More information about the linux-phy mailing list