[PATCH v3 1/4] dt-bindings: phy: qcom,qmp: Mark '#clock-cells' as a 'optional' property

[Bjorn Andersson]

On Mon 18 Apr 13:55 PDT 2022, Bhupesh Sharma wrote:

> '#clock-cells' is not a required property for qmp-phy(s) in the
> '/' node, but it should be is used in 'phy@' subnode (where it is
> actually a 'required' property). Fix the same.
> 

It's not that #clock-cells is "not a required property", it's that the
clock comes out of the phy (the child node), so there is no clocks
provided by the parent device.


Please rewrite the commit message.

> This also fixes the following 'make dtbs_check' warning(s):
> 
> sm8350-microsoft-surface-duo2.dt.yaml: phy at 1d87000:
>   '#clock-cells' is a required property
> 
> Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
> Cc: Vinod Koul <vkoul at kernel.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index 8b850c5ab116..c39ead81ecd7 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -66,9 +66,6 @@ properties:
>        - description: Address and length of PHY's common serdes block.
>        - description: Address and length of PHY's DP_COM control block.
>  
> -  "#clock-cells":
> -    enum: [ 1, 2 ]
> -
>    "#address-cells":
>      enum: [ 1, 2 ]
>  
> @@ -112,11 +109,13 @@ patternProperties:
>      description:
>        Each device node of QMP phy is required to have as many child nodes as
>        the number of lanes the PHY has.
> +    properties:
> +      "#clock-cells":
> +        enum: [ 0, 1, 2 ]

The commit message doesn't mention the fact that 0 is also a valid
value. Perhaps just keep it [1, 2] in this patch?

Regards,
Bjorn

>  
>  required:
>    - compatible
>    - reg
> -  - "#clock-cells"
>    - "#address-cells"
>    - "#size-cells"
>    - ranges
> @@ -468,7 +467,6 @@ examples:
>      usb_2_qmpphy: phy-wrapper at 88eb000 {
>          compatible = "qcom,sdm845-qmp-usb3-uni-phy";
>          reg = <0x088eb000 0x18c>;
> -        #clock-cells = <1>;
>          #address-cells = <1>;
>          #size-cells = <1>;
>          ranges = <0x0 0x088eb000 0x2000>;
> -- 
> 2.35.1
>