[PATCH v3 1/4] dt-bindings: phy: qcom, qmp: Mark '#clock-cells' as a 'optional' property

[Rob Herring]

On Tue, 19 Apr 2022 02:25:06 +0530, Bhupesh Sharma wrote:
> '#clock-cells' is not a required property for qmp-phy(s) in the
> '/' node, but it should be is used in 'phy@' subnode (where it is
> actually a 'required' property). Fix the same.
> 
> This also fixes the following 'make dtbs_check' warning(s):
> 
> sm8350-microsoft-surface-duo2.dt.yaml: phy at 1d87000:
>   '#clock-cells' is a required property
> 
> Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
> Cc: Vinod Koul <vkoul at kernel.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


phy at 1c07000: 'lanes at 1c06000' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm/boot/dts/qcom-sdx55-mtp.dtb
	arch/arm/boot/dts/qcom-sdx55-t55.dtb
	arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dtb

phy at 1c0e000: 'lanes at 1c0e200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sc7280-crd.dtb
	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dtb
	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb
	arch/arm64/boot/dts/qcom/sc7280-idp2.dtb
	arch/arm64/boot/dts/qcom/sc7280-idp.dtb

phy at 1d87000: 'lanes at 1d87400', 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sm8450-hdk.dtb
	arch/arm64/boot/dts/qcom/sm8450-qrd.dtb

phy at 1d87000: 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dtb

phy at 627000: 'vdda-phy-max-microamp', 'vdda-pll-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dtb
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dtb

phy-wrapper at 88e9000: 'vdda-phy-supply' is a required property
	arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dtb
	arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dtb

phy-wrapper at 88e9000: 'vdda-pll-supply' is a required property
	arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dtb
	arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dtb

ssphy at 78000: '#clock-cells', 'lane at 78200' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb