[PATCH v3 9/9] PCI: imx: add the imx8mm pcie support
Richard Zhu
hongxing.zhu at nxp.com
Thu Oct 21 19:06:10 PDT 2021
> -----Original Message-----
> From: Lucas Stach <l.stach at pengutronix.de>
> Sent: Saturday, October 16, 2021 3:00 AM
> To: Richard Zhu <hongxing.zhu at nxp.com>; tharvey at gateworks.com;
> kishon at ti.com; vkoul at kernel.org; robh at kernel.org;
> galak at kernel.crashing.org; shawnguo at kernel.org
> Cc: linux-phy at lists.infradead.org; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> kernel at pengutronix.de; dl-linux-imx <linux-imx at nxp.com>
> Subject: Re: [PATCH v3 9/9] PCI: imx: add the imx8mm pcie support
>
> Am Dienstag, dem 12.10.2021 um 16:41 +0800 schrieb Richard Zhu:
> > i.MX8MM PCIe works mostly like the i.MX8MQ one, but has a different
> > PHY and allows to output the internal PHY reference clock via the refclk
> pad.
> > Add the i.MX8MM PCIe support based on the standalone PHY driver.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> > ---
> > drivers/pci/controller/dwc/pci-imx6.c | 63
> > ++++++++++++++++++++++++++-
> > 1 file changed, 61 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index 26f49f797b0f..73022e37b1c5 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -29,6 +29,7 @@
> > #include <linux/types.h>
> > #include <linux/interrupt.h>
> > #include <linux/reset.h>
> > +#include <linux/phy/phy.h>
> > #include <linux/pm_domain.h>
> > #include <linux/pm_runtime.h>
> >
> > @@ -49,6 +50,7 @@ enum imx6_pcie_variants {
> > IMX6QP,
> > IMX7D,
> > IMX8MQ,
> > + IMX8MM,
> > };
> >
> > #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
> > @@ -80,6 +82,7 @@ struct imx6_pcie {
> > u32 tx_deemph_gen2_6db;
> > u32 tx_swing_full;
> > u32 tx_swing_low;
> > + u32 refclk_pad_mode;
>
> As Matthias already noticed: drop this.
[Richard Zhu] Got that, thanks.
>
> > struct regulator *vpcie;
> > struct regulator *vph;
> > void __iomem *phy_base;
> > @@ -88,6 +91,7 @@ struct imx6_pcie {
> > struct device *pd_pcie;
> > /* power domain for pcie phy */
> > struct device *pd_pcie_phy;
> > + struct phy *phy;
> > const struct imx6_pcie_drvdata *drvdata; };
> >
> > @@ -372,6 +376,8 @@ static void imx6_pcie_assert_core_reset(struct
> imx6_pcie *imx6_pcie)
> > case IMX7D:
> > case IMX8MQ:
> > reset_control_assert(imx6_pcie->pciephy_reset);
> > + fallthrough;
> > + case IMX8MM:
> > reset_control_assert(imx6_pcie->apps_reset);
> > break;
> > case IMX6SX:
> > @@ -407,7 +413,8 @@ static void imx6_pcie_assert_core_reset(struct
> > imx6_pcie *imx6_pcie)
> >
> > static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie
> > *imx6_pcie) {
> > - WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ);
> > + WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
> > + imx6_pcie->drvdata->variant != IMX8MM);
> > return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 :
> IOMUXC_GPR14;
> > }
> >
> > @@ -447,6 +454,7 @@ static int imx6_pcie_enable_ref_clk(struct
> imx6_pcie *imx6_pcie)
> > case IMX7D:
> > break;
> > case IMX8MQ:
> > + case IMX8MM:
> > ret = clk_prepare_enable(imx6_pcie->pcie_aux);
> > if (ret) {
> > dev_err(dev, "unable to enable pcie_aux clock\n"); @@ -522,6
> > +530,14 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie
> *imx6_pcie)
> > goto err_ref_clk;
> > }
> >
> > + switch (imx6_pcie->drvdata->variant) {
> > + case IMX8MM:
> > + if (phy_power_on(imx6_pcie->phy))
> > + pr_info("unable to enable pcie phy clock\n");
>
> It a implementation detail of the PHY driver that this just turns on the clock.
> dev_err("unable to power on PHY\n") or something like that.
[Richard Zhu] Okay. Thanks.
>
> > + break;
> > + default:
> > + break;
> > + }
> > /* allow the clocks to stabilize */
> > usleep_range(200, 500);
> >
> > @@ -538,6 +554,10 @@ static void imx6_pcie_deassert_core_reset(struct
> imx6_pcie *imx6_pcie)
> > case IMX8MQ:
> > reset_control_deassert(imx6_pcie->pciephy_reset);
> > break;
> > + case IMX8MM:
> > + if (phy_init(imx6_pcie->phy) != 0)
> > + dev_err(dev, "Waiting for PHY ready timeout!\n");
> > + break;
> > case IMX7D:
> > reset_control_deassert(imx6_pcie->pciephy_reset);
> >
> > @@ -614,6 +634,8 @@ static void imx6_pcie_configure_type(struct
> > imx6_pcie *imx6_pcie) static void imx6_pcie_init_phy(struct imx6_pcie
> > *imx6_pcie) {
> > switch (imx6_pcie->drvdata->variant) {
> > + case IMX8MM:
> > + break;
> > case IMX8MQ:
> > /*
> > * TODO: Currently this code assumes external @@ -753,6 +775,7
> @@
> > static void imx6_pcie_ltssm_enable(struct device *dev)
> > break;
> > case IMX7D:
> > case IMX8MQ:
> > + case IMX8MM:
> > reset_control_deassert(imx6_pcie->apps_reset);
> > break;
> > }
> > @@ -871,6 +894,7 @@ static void imx6_pcie_ltssm_disable(struct device
> *dev)
> > IMX6Q_GPR12_PCIE_CTL_2, 0);
> > break;
> > case IMX7D:
> > + case IMX8MM:
> > reset_control_assert(imx6_pcie->apps_reset);
> > break;
> > default:
> > @@ -930,6 +954,7 @@ static void imx6_pcie_clk_disable(struct imx6_pcie
> *imx6_pcie)
> > IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> > break;
> > case IMX8MQ:
> > + case IMX8MM:
> > clk_disable_unprepare(imx6_pcie->pcie_aux);
> > break;
> > default:
> > @@ -985,6 +1010,7 @@ static int imx6_pcie_probe(struct platform_device
> *pdev)
> > struct imx6_pcie *imx6_pcie;
> > struct device_node *np;
> > struct resource *dbi_base;
> > + struct device_node *phy_node;
> > struct device_node *node = dev->of_node;
> > int ret;
> > u16 val;
> > @@ -1019,6 +1045,14 @@ static int imx6_pcie_probe(struct
> platform_device *pdev)
> > return PTR_ERR(imx6_pcie->phy_base);
> > }
> >
> > + imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
> > + if (IS_ERR(imx6_pcie->phy)) {
> > + if (PTR_ERR(imx6_pcie->phy) == -EPROBE_DEFER)
> > + return -EPROBE_DEFER;
> > + /* Set NULL if there is no pcie-phy */
> > + imx6_pcie->phy = NULL;
> > + }
>
> Move this into the i.MX8MM specific section below. The PHY is required on
> the 8MM and we should not ignore any errors.
[Richard Zhu] Okay. Thanks.
Best Regards
Richard Zhu
>
> Regards,
> Lucas
>
> > +
> > dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
> > if (IS_ERR(pci->dbi_base))
> > @@ -1090,6 +1124,18 @@ static int imx6_pcie_probe(struct
> platform_device *pdev)
> > return PTR_ERR(imx6_pcie->apps_reset);
> > }
> > break;
> > + case IMX8MM:
> > + imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
> > + if (IS_ERR(imx6_pcie->pcie_aux))
> > + return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
> > + "pcie_aux clock source missing or invalid\n");
> > + imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
> > + "apps");
> > + if (IS_ERR(imx6_pcie->apps_reset)) {
> > + dev_err(dev, "Failed to get PCIE APPS reset control\n");
> > + return PTR_ERR(imx6_pcie->apps_reset);
> > + }
> > + break;
> > default:
> > break;
> > }
> > @@ -1130,6 +1176,14 @@ static int imx6_pcie_probe(struct
> platform_device *pdev)
> > &imx6_pcie->tx_swing_low))
> > imx6_pcie->tx_swing_low = 127;
> >
> > + /* get PHY refclk pad mode if there is PHY node */
> > + phy_node = of_parse_phandle(node, "phys", 0);
> > + if (phy_node) {
> > + of_property_read_u32(phy_node, "fsl,refclk-pad-mode",
> > + &imx6_pcie->refclk_pad_mode);
> > + of_node_put(phy_node);
> > + }
> > +
> > /* Limit link speed */
> > pci->link_gen = 1;
> > of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen); @@
> > -1202,6 +1256,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > [IMX8MQ] = {
> > .variant = IMX8MQ,
> > },
> > + [IMX8MM] = {
> > + .variant = IMX8MM,
> > + .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> > + },
> > };
> >
> > static const struct of_device_id imx6_pcie_of_match[] = { @@ -1209,7
> > +1267,8 @@ static const struct of_device_id imx6_pcie_of_match[] = {
> > { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
> > { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
> > { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
> > - { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } ,
> > + { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
> > + { .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
> > {},
> > };
> >
>
More information about the linux-phy
mailing list