[PATCH v3 9/9] PCI: imx: add the imx8mm pcie support
Lucas Stach
l.stach at pengutronix.de
Fri Oct 15 12:00:22 PDT 2021
Am Dienstag, dem 12.10.2021 um 16:41 +0800 schrieb Richard Zhu:
> i.MX8MM PCIe works mostly like the i.MX8MQ one, but has a different PHY
> and allows to output the internal PHY reference clock via the refclk pad.
> Add the i.MX8MM PCIe support based on the standalone PHY driver.
>
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 63 ++++++++++++++++++++++++++-
> 1 file changed, 61 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 26f49f797b0f..73022e37b1c5 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -29,6 +29,7 @@
> #include <linux/types.h>
> #include <linux/interrupt.h>
> #include <linux/reset.h>
> +#include <linux/phy/phy.h>
> #include <linux/pm_domain.h>
> #include <linux/pm_runtime.h>
>
> @@ -49,6 +50,7 @@ enum imx6_pcie_variants {
> IMX6QP,
> IMX7D,
> IMX8MQ,
> + IMX8MM,
> };
>
> #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
> @@ -80,6 +82,7 @@ struct imx6_pcie {
> u32 tx_deemph_gen2_6db;
> u32 tx_swing_full;
> u32 tx_swing_low;
> + u32 refclk_pad_mode;
As Matthias already noticed: drop this.
> struct regulator *vpcie;
> struct regulator *vph;
> void __iomem *phy_base;
> @@ -88,6 +91,7 @@ struct imx6_pcie {
> struct device *pd_pcie;
> /* power domain for pcie phy */
> struct device *pd_pcie_phy;
> + struct phy *phy;
> const struct imx6_pcie_drvdata *drvdata;
> };
>
> @@ -372,6 +376,8 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> case IMX7D:
> case IMX8MQ:
> reset_control_assert(imx6_pcie->pciephy_reset);
> + fallthrough;
> + case IMX8MM:
> reset_control_assert(imx6_pcie->apps_reset);
> break;
> case IMX6SX:
> @@ -407,7 +413,8 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
>
> static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
> {
> - WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ);
> + WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
> + imx6_pcie->drvdata->variant != IMX8MM);
> return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
> }
>
> @@ -447,6 +454,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> case IMX7D:
> break;
> case IMX8MQ:
> + case IMX8MM:
> ret = clk_prepare_enable(imx6_pcie->pcie_aux);
> if (ret) {
> dev_err(dev, "unable to enable pcie_aux clock\n");
> @@ -522,6 +530,14 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> goto err_ref_clk;
> }
>
> + switch (imx6_pcie->drvdata->variant) {
> + case IMX8MM:
> + if (phy_power_on(imx6_pcie->phy))
> + pr_info("unable to enable pcie phy clock\n");
It a implementation detail of the PHY driver that this just turns on
the clock. dev_err("unable to power on PHY\n") or something like that.
> + break;
> + default:
> + break;
> + }
> /* allow the clocks to stabilize */
> usleep_range(200, 500);
>
> @@ -538,6 +554,10 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> case IMX8MQ:
> reset_control_deassert(imx6_pcie->pciephy_reset);
> break;
> + case IMX8MM:
> + if (phy_init(imx6_pcie->phy) != 0)
> + dev_err(dev, "Waiting for PHY ready timeout!\n");
> + break;
> case IMX7D:
> reset_control_deassert(imx6_pcie->pciephy_reset);
>
> @@ -614,6 +634,8 @@ static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> {
> switch (imx6_pcie->drvdata->variant) {
> + case IMX8MM:
> + break;
> case IMX8MQ:
> /*
> * TODO: Currently this code assumes external
> @@ -753,6 +775,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
> break;
> case IMX7D:
> case IMX8MQ:
> + case IMX8MM:
> reset_control_deassert(imx6_pcie->apps_reset);
> break;
> }
> @@ -871,6 +894,7 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
> IMX6Q_GPR12_PCIE_CTL_2, 0);
> break;
> case IMX7D:
> + case IMX8MM:
> reset_control_assert(imx6_pcie->apps_reset);
> break;
> default:
> @@ -930,6 +954,7 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> break;
> case IMX8MQ:
> + case IMX8MM:
> clk_disable_unprepare(imx6_pcie->pcie_aux);
> break;
> default:
> @@ -985,6 +1010,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> struct imx6_pcie *imx6_pcie;
> struct device_node *np;
> struct resource *dbi_base;
> + struct device_node *phy_node;
> struct device_node *node = dev->of_node;
> int ret;
> u16 val;
> @@ -1019,6 +1045,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> return PTR_ERR(imx6_pcie->phy_base);
> }
>
> + imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
> + if (IS_ERR(imx6_pcie->phy)) {
> + if (PTR_ERR(imx6_pcie->phy) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + /* Set NULL if there is no pcie-phy */
> + imx6_pcie->phy = NULL;
> + }
Move this into the i.MX8MM specific section below. The PHY is required
on the 8MM and we should not ignore any errors.
Regards,
Lucas
> +
> dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
> if (IS_ERR(pci->dbi_base))
> @@ -1090,6 +1124,18 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> return PTR_ERR(imx6_pcie->apps_reset);
> }
> break;
> + case IMX8MM:
> + imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
> + if (IS_ERR(imx6_pcie->pcie_aux))
> + return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
> + "pcie_aux clock source missing or invalid\n");
> + imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
> + "apps");
> + if (IS_ERR(imx6_pcie->apps_reset)) {
> + dev_err(dev, "Failed to get PCIE APPS reset control\n");
> + return PTR_ERR(imx6_pcie->apps_reset);
> + }
> + break;
> default:
> break;
> }
> @@ -1130,6 +1176,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> &imx6_pcie->tx_swing_low))
> imx6_pcie->tx_swing_low = 127;
>
> + /* get PHY refclk pad mode if there is PHY node */
> + phy_node = of_parse_phandle(node, "phys", 0);
> + if (phy_node) {
> + of_property_read_u32(phy_node, "fsl,refclk-pad-mode",
> + &imx6_pcie->refclk_pad_mode);
> + of_node_put(phy_node);
> + }
> +
> /* Limit link speed */
> pci->link_gen = 1;
> of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen);
> @@ -1202,6 +1256,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> [IMX8MQ] = {
> .variant = IMX8MQ,
> },
> + [IMX8MM] = {
> + .variant = IMX8MM,
> + .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> + },
> };
>
> static const struct of_device_id imx6_pcie_of_match[] = {
> @@ -1209,7 +1267,8 @@ static const struct of_device_id imx6_pcie_of_match[] = {
> { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
> { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
> { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
> - { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } ,
> + { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
> + { .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
> {},
> };
>
More information about the linux-phy
mailing list