ss.h: unnecessary bit-field

Dominik Brodowski linux at dominikbrodowski.net
Wed Jul 21 08:45:34 EDT 2010


Hey,

On Sat, Jul 17, 2010 at 10:03:52PM +0900, Komuro wrote:
> Hi,
> 
> include/pcmcia/ss.h
> 
> >	/* socket setup is done so resources should be able to be allocated.
> >	 * Only if set to 1, calls to find_{io,mem}_region are handled, and
> >	 * insertio events are actually managed by the PCMCIA layer.*/
> >	u8				resource_setup_done:1;
> >
> >	/* It's old if resource setup is done using adjust_resource_info() */
> >	u8				resource_setup_old:1;
> >	u8				resource_setup_new:1;
> >
> >	u8				reserved:5;
> 
> meaningless bit-field?

resource_setup_done is still needed.

What about this patch?

From: Dominik Brodowski <linux at dominikbrodowski.net>
Date: Wed, 21 Jul 2010 14:43:05 +0200
Subject: [PATCH] pcmcia: remove unused flag, simplify headers

As we only provide one way to set up resources now, we can remove
the resource-setup-related bitfield (except resource_setup_done).
In addition, pcmcia_state only consisted of one entry, so remove
this bitfield as well.

Suggested-by: Komuro <komurojun-mbn at nifty.com>
Signed-off-by: Dominik Brodowski <linux at dominikbrodowski.net>

diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 43dadab..73aeaea 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -294,7 +294,7 @@ static int pcmcia_device_probe(struct device *dev)
 	}
 
 	mutex_lock(&s->ops_mutex);
-	if ((s->pcmcia_state.has_pfc) &&
+	if ((s->pcmcia_pfc) &&
 	    (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
 		pcmcia_parse_uevents(s, PCMCIA_UEVENT_REQUERY);
 	mutex_unlock(&s->ops_mutex);
@@ -359,7 +359,7 @@ static int pcmcia_device_remove(struct device *dev)
 	 * pseudo multi-function card, we need to unbind
 	 * all devices
 	 */
-	if ((p_dev->socket->pcmcia_state.has_pfc) &&
+	if ((p_dev->socket->pcmcia_pfc) &&
 	    (p_dev->socket->device_count > 0) &&
 	    (p_dev->device_no == 0))
 		pcmcia_card_remove(p_dev->socket, p_dev);
@@ -680,7 +680,7 @@ static void pcmcia_requery(struct pcmcia_socket *s)
 	 * call pcmcia_device_add() -- which will fail if both
 	 * devices are already registered. */
 	mutex_lock(&s->ops_mutex);
-	has_pfc = s->pcmcia_state.has_pfc;
+	has_pfc = s->pcmcia_pfc;
 	mutex_unlock(&s->ops_mutex);
 	if (has_pfc)
 		pcmcia_device_add(s, 0);
@@ -812,7 +812,7 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev,
 	if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) {
 		dev_dbg(&dev->dev, "this is a pseudo-multi-function device\n");
 		mutex_lock(&dev->socket->ops_mutex);
-		dev->socket->pcmcia_state.has_pfc = 1;
+		dev->socket->pcmcia_pfc = 1;
 		mutex_unlock(&dev->socket->ops_mutex);
 		if (dev->device_no != did->device_no)
 			return 0;
@@ -826,7 +826,7 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev,
 
 		/* if this is a pseudo-multi-function device,
 		 * we need explicit matches */
-		if (dev->socket->pcmcia_state.has_pfc)
+		if (dev->socket->pcmcia_pfc)
 			return 0;
 		if (dev->device_no)
 			return 0;
@@ -1225,7 +1225,7 @@ static int pcmcia_bus_add(struct pcmcia_socket *skt)
 	atomic_set(&skt->present, 1);
 
 	mutex_lock(&skt->ops_mutex);
-	skt->pcmcia_state.has_pfc = 0;
+	skt->pcmcia_pfc = 0;
 	destroy_cis_cache(skt); /* to be on the safe side... */
 	mutex_unlock(&skt->ops_mutex);
 
@@ -1316,7 +1316,7 @@ static int __devinit pcmcia_bus_add_socket(struct device *dev,
 	}
 
 	INIT_LIST_HEAD(&socket->devices_list);
-	memset(&socket->pcmcia_state, 0, sizeof(u8));
+	socket->pcmcia_pfc = 0;
 	socket->device_count = 0;
 	atomic_set(&socket->present, 0);
 
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index d217dc1..13245a2 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -1113,8 +1113,6 @@ static ssize_t store_io_db(struct device *dev,
 
 	mutex_lock(&s->ops_mutex);
 	ret = adjust_io(s, add, start_addr, end_addr);
-	if (!ret)
-		s->resource_setup_new = 1;
 	mutex_unlock(&s->ops_mutex);
 
 	return ret ? ret : count;
@@ -1181,8 +1179,6 @@ static ssize_t store_mem_db(struct device *dev,
 
 	mutex_lock(&s->ops_mutex);
 	ret = adjust_memory(s, add, start_addr, end_addr);
-	if (!ret)
-		s->resource_setup_new = 1;
 	mutex_unlock(&s->ops_mutex);
 
 	return ret ? ret : count;
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 66740b7..aeac271 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -162,17 +162,10 @@ struct pcmcia_socket {
 	u_int				pci_irq;
 	struct pci_dev			*cb_dev;
 
-
 	/* socket setup is done so resources should be able to be allocated.
 	 * Only if set to 1, calls to find_{io,mem}_region are handled, and
 	 * insertio events are actually managed by the PCMCIA layer.*/
-	u8				resource_setup_done:1;
-
-	/* It's old if resource setup is done using adjust_resource_info() */
-	u8				resource_setup_old:1;
-	u8				resource_setup_new:1;
-
-	u8				reserved:5;
+	u8				resource_setup_done;
 
 	/* socket operations */
 	struct pccard_operations	*ops;
@@ -218,13 +211,8 @@ struct pcmcia_socket {
 	 * incorrectness and change */
 	u8				device_count;
 
-	/* 16-bit state: */
-	struct {
-		/* the PCMCIA card consists of two pseudo devices */
-		u8			has_pfc:1;
-
-		u8			reserved:7;
-	} pcmcia_state;
+	/* does the PCMCIA card consist of two pseudo devices? */
+	u8				pcmcia_pfc;
 
 	/* non-zero if PCMCIA card is present */
 	atomic_t			present;



More information about the linux-pcmcia mailing list