possible bug in pd6729

[John G. Heim]

From: "Wolfram Sang" <w.sang at pengutronix.de>
To: "John G. Heim" <jheim at math.wisc.edu>
Cc: <linux-pcmcia at lists.infradead.org>
Sent: Friday, September 11, 2009 9:00 AM
Subject: Re: possible bug in pd6729

> Would you mind sending the 'lspci -vvv' output nevertheless? It might be
> useful for debugging similar cases.

Heck, I don't mind. I just don't want to be a pest. I do appreciate your 
efforts. It's just that this is a really old laptop and I wouldn't expect 
help with it at this time.  But if you're willing...

Output from lspci -dvv:

00:00.0 Host bridge: Intel Corporation 430MX - 82437MX Mob. System Ctrlr 
(MTSC) & 82438MX Data Path (MTDP) (rev 02)
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
 Latency: 32

00:01.0 Bridge: Intel Corporation 430MX - 82371MX Mobile PCI I/O IDE 
Xcelerator (MPIIX) (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Kernel driver in use: PIIX_IDE
 Kernel modules: piix

00:11.0 PCI bridge: Intel Corporation 82380PB PCI to PCI Docking Bridge 
(prog-if 80)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 16 bytes
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00000000-00000fff
 Memory behind bridge: 00000000-000fffff
 Prefetchable memory behind bridge: fff00000-000fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:13.0 PCMCIA bridge: Cirrus Logic CL 6729 (rev ee)
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 0
 Region 0: I/O ports at fcfc [size=4]
 Kernel driver in use: pd6729
 Kernel modules: pd6729

00:14.0 VGA compatible controller: Cirrus Logic GD 7548 (prog-if 00 [VGA 
controller])
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 0
 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
 Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
 Kernel modules: cirrusfb

01:0a.0 PCMCIA bridge: Cirrus Logic CL 6729 (rev ee)
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 0
 Region 0: I/O ports at <ignored>
 Kernel driver in use: pd6729
 Kernel modules: pd6729