[PATCH 07/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (isdn)
Dominik Brodowski
linux at dominikbrodowski.net
Sat Oct 24 15:42:57 EDT 2009
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: Karsten Keil <isdn at linux-pingi.de>
Signed-off-by: Dominik Brodowski <linux at dominikbrodowski.net>
---
drivers/isdn/hardware/avm/avm_cs.c | 2 -
drivers/isdn/hisax/avma1_cs.c | 26 ++-------------
drivers/isdn/hisax/elsa_cs.c | 45 +++++++---------------------
drivers/isdn/hisax/sedlbauer_cs.c | 58 ++++++++++++-----------------------
drivers/isdn/hisax/teles_cs.c | 37 ++++------------------
5 files changed, 42 insertions(+), 126 deletions(-)
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index c725655..d388ead 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -198,7 +198,6 @@ static int avmcs_config(struct pcmcia_device *link)
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
- cs_error(link, RequestIRQ, i);
/* undo */
pcmcia_disable_device(link);
break;
@@ -209,7 +208,6 @@ static int avmcs_config(struct pcmcia_device *link)
*/
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0) {
- cs_error(link, RequestConfiguration, i);
pcmcia_disable_device(link);
break;
}
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 23560c8..6d963f9 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -30,22 +30,6 @@ MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for AVM A1/Fritz!PCMCIA car
MODULE_AUTHOR("Carsten Paeth");
MODULE_LICENSE("GPL");
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"avma1_cs.c 1.00 1998/01/23 10:00:00 (Carsten Paeth)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -119,7 +103,7 @@ static int avma1cs_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "avma1cs_attach()\n");
+ dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -161,7 +145,7 @@ static int avma1cs_probe(struct pcmcia_device *p_dev)
static void avma1cs_detach(struct pcmcia_device *link)
{
- DEBUG(0, "avma1cs_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link);
avma1cs_release(link);
kfree(link->priv);
} /* avma1cs_detach */
@@ -203,7 +187,7 @@ static int avma1cs_config(struct pcmcia_device *link)
dev = link->priv;
- DEBUG(0, "avma1cs_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "avma1cs_config(0x%p)\n", link);
devname[0] = 0;
if (link->prod_id[1])
@@ -218,7 +202,6 @@ static int avma1cs_config(struct pcmcia_device *link)
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
- cs_error(link, RequestIRQ, i);
/* undo */
pcmcia_disable_device(link);
break;
@@ -229,7 +212,6 @@ static int avma1cs_config(struct pcmcia_device *link)
*/
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0) {
- cs_error(link, RequestConfiguration, i);
pcmcia_disable_device(link);
break;
}
@@ -281,7 +263,7 @@ static void avma1cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
- DEBUG(0, "avma1cs_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "avma1cs_release(0x%p)\n", link);
/* now unregister function with hisax */
HiSax_closecard(local->node.minor);
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index f4d0fe2..1bb3ec9 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -57,23 +57,6 @@ MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Elsa PCM cards");
MODULE_AUTHOR("Klaus Lichtenwalder");
MODULE_LICENSE("Dual MPL/GPL");
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"elsa_cs.c $Revision: 1.2.2.4 $ $Date: 2004/01/25 15:07:06 $ (K.Lichtenwalder)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -142,7 +125,7 @@ static int elsa_cs_probe(struct pcmcia_device *link)
{
local_info_t *local;
- DEBUG(0, "elsa_cs_attach()\n");
+ dev_dbg(&link->dev, "elsa_cs_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -188,7 +171,7 @@ static void elsa_cs_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
- DEBUG(0, "elsa_cs_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "elsa_cs_detach(0x%p)\n", link);
info->busy = 1;
elsa_cs_release(link);
@@ -231,30 +214,25 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
static int elsa_cs_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int i, last_fn;
+ int i;
IsdnCard_t icard;
- DEBUG(0, "elsa_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "elsa_config(0x%p)\n", link);
dev = link->priv;
i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL);
- if (i != 0) {
- last_fn = RequestIO;
- goto cs_failed;
- }
+ if (i != 0)
+ goto failed;
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
link->irq.AssignedIRQ = 0;
- last_fn = RequestIRQ;
- goto cs_failed;
+ goto failed;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != 0) {
- last_fn = RequestConfiguration;
- goto cs_failed;
- }
+ if (i != 0)
+ goto failed;
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. *//* */
@@ -290,8 +268,7 @@ static int elsa_cs_config(struct pcmcia_device *link)
((local_info_t*)link->priv)->cardnr = i;
return 0;
-cs_failed:
- cs_error(link, last_fn, i);
+failed:
elsa_cs_release(link);
return -ENODEV;
} /* elsa_cs_config */
@@ -308,7 +285,7 @@ static void elsa_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
- DEBUG(0, "elsa_cs_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "elsa_cs_release(0x%p)\n", link);
if (local) {
if (local->cardnr >= 0) {
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 9a3c9f5..d3e600b 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -57,24 +57,6 @@ MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Sedlbauer cards");
MODULE_AUTHOR("Marcus Niemann");
MODULE_LICENSE("Dual MPL/GPL");
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"sedlbauer_cs.c 1.1a 2001/01/28 15:04:04 (M.Niemann)";
-#else
-#define DEBUG(n, args...)
-#endif
-
/*====================================================================*/
@@ -151,7 +133,7 @@ static int sedlbauer_probe(struct pcmcia_device *link)
{
local_info_t *local;
- DEBUG(0, "sedlbauer_attach()\n");
+ dev_dbg(&link->dev, "sedlbauer_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -198,7 +180,7 @@ static int sedlbauer_probe(struct pcmcia_device *link)
static void sedlbauer_detach(struct pcmcia_device *link)
{
- DEBUG(0, "sedlbauer_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
((local_info_t *)link->priv)->stop = 1;
sedlbauer_release(link);
@@ -214,9 +196,6 @@ static void sedlbauer_detach(struct pcmcia_device *link)
device available to the system.
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int sedlbauer_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -309,10 +288,10 @@ static int sedlbauer_config(struct pcmcia_device *link)
{
local_info_t *dev = link->priv;
win_req_t *req;
- int last_fn, last_ret;
+ int ret;
IsdnCard_t icard;
- DEBUG(0, "sedlbauer_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
if (!req)
@@ -330,8 +309,8 @@ static int sedlbauer_config(struct pcmcia_device *link)
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
- if (last_ret)
+ ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+ if (ret)
goto failed;
/*
@@ -339,15 +318,20 @@ static int sedlbauer_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@@ -380,19 +364,17 @@ static int sedlbauer_config(struct pcmcia_device *link)
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
- last_ret = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->stop), &icard);
- if (last_ret < 0) {
- printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
- last_ret, link->io.BasePort1);
+ ret = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->stop), &icard);
+ if (ret < 0) {
+ printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
+ ret, link->io.BasePort1);
sedlbauer_release(link);
return -ENODEV;
} else
- ((local_info_t*)link->priv)->cardnr = last_ret;
+ ((local_info_t*)link->priv)->cardnr = ret;
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
sedlbauer_release(link);
return -ENODEV;
@@ -410,7 +392,7 @@ failed:
static void sedlbauer_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
- DEBUG(0, "sedlbauer_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "sedlbauer_release(0x%p)\n", link);
if (local) {
if (local->cardnr >= 0) {
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 623d111..7b11c15 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -38,23 +38,6 @@ MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Teles PCMCIA cards");
MODULE_AUTHOR("Christof Petig, christof.petig at wtal.de, Karsten Keil, kkeil at suse.de");
MODULE_LICENSE("GPL");
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"teles_cs.c 2.10 2002/07/30 22:23:34 kkeil";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -133,7 +116,7 @@ static int teles_probe(struct pcmcia_device *link)
{
local_info_t *local;
- DEBUG(0, "teles_attach()\n");
+ dev_dbg(&link->dev, "teles_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -178,7 +161,7 @@ static void teles_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
- DEBUG(0, "teles_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "teles_detach(0x%p)\n", link);
info->busy = 1;
teles_cs_release(link);
@@ -221,30 +204,25 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev,
static int teles_cs_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int i, last_fn;
+ int i;
IsdnCard_t icard;
- DEBUG(0, "teles_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "teles_config(0x%p)\n", link);
dev = link->priv;
i = pcmcia_loop_config(link, teles_cs_configcheck, NULL);
- if (i != 0) {
- last_fn = RequestIO;
+ if (i != 0)
goto cs_failed;
- }
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
link->irq.AssignedIRQ = 0;
- last_fn = RequestIRQ;
goto cs_failed;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != 0) {
- last_fn = RequestConfiguration;
+ if (i != 0)
goto cs_failed;
- }
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. *//* */
@@ -283,7 +261,6 @@ static int teles_cs_config(struct pcmcia_device *link)
return 0;
cs_failed:
- cs_error(link, last_fn, i);
teles_cs_release(link);
return -ENODEV;
} /* teles_cs_config */
@@ -300,7 +277,7 @@ static void teles_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
- DEBUG(0, "teles_cs_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "teles_cs_release(0x%p)\n", link);
if (local) {
if (local->cardnr >= 0) {
--
1.6.0.4
More information about the linux-pcmcia
mailing list