Changing the IO window of the cardbus bridge

[Dominik Brodowski]

Hi,

On Fri, Mar 31, 2006 at 11:46:26AM -0600, Richard Smith wrote:
> > >
> > > How can I change this IO window to another location to see if it works?
> >
> > You can also add other IO ports to /etc/pcmcia/config.opts (where
> > include port 0x4000-0x4fff already seems to be present), e.g.
> >
> > include port 0x100-0x3af
> > include port 0x3e0-0x4ff
> > include port 0x820-0x8ff
> > include port 0xc00-0xcf7
> 
> I have all that all ready.
> 
> From my config.opts:
> 
> ==========
> include port 0x100-0x3af
> include port 0x3e0-0x4ff
> include port 0x820-0x8ff
> include port 0xc00-0xcf7
> 
> include memory 0xc0000-0xfffff
> include memory 0xa0000000-0xa0ffffff
> include memory 0x60000000-0x60ffffff
> 
> # These may hurt on FSC.
> # include port 0x3c0-0x3d2
> # Exclude 0x3d3 as Radeon IGP MCE's if you touch these ports
> # include port 0x3d4-0x3df
> 
> # High port numbers do not always work...
> include port 0x1000-0x100f
> 
> # Extra port range for IBM Token Ring
> include port 0xa00-0xaff
> 
> exclude port 0x4040-0x404f
> ========
> 
> Notice that I am also trying to exclude the IO range its using but
> that dosen't seem to take.  It still tries to use that area
> 
> The kernel seems to think think these ranges are ok...
> 
> cs: IO port probe 0x100-0x3af: clean.
> cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
> cs: IO port probe 0x820-0x8ff: clean.
> cs: IO port probe 0xc00-0xcf7: clean.
> cs: IO port probe 0x1000-0x100f: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> 
> Hmmm.. I just noticed that my 0x4040-0404f did not shown up.  Should it have?
> 
> If those other ranges are considered clean then why is it choosing
> 0x4040 & 0x404e?

Strange indeed. IDE guys, any ideas? Also, what's the output of lspcmcia -vv
(you need pcmciautils-013 for this).

	Dominik