Carbus card does not show up in lspci
Nicolas Bellido
ml at acolin.be
Thu Mar 30 02:44:24 EST 2006
Ping ?
On Sunday 19 March 2006 00:11, Nicolas Bellido wrote:
> Hi,
>
> I'm trying to help someone to get his HWGPCMCIA-54 PCMCIA wireless card
> to work on his Toshiba Satellite Pro A60 laptop. The laptop has a TI
> PCI1440 Cardbus controller.
>
> The problem is that the card does not show up in lspci.
>
> The dmesg, lspci -vv and /proc/iomem are attached to this mail below.
>
> The kernel is a 2.6.15-r1, from Gentoo.
>
> I already tried a couple of things, line passing pci=assign-busses, or
> reserving some memory for the bridge, as per lspci:
>
> 02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
> Controller. (rev 02) Subsystem: Toshiba America Info Systems Unknown device
> ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache
> Line Size 20
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
> Memory window 0: 90000000-91fff000 (prefetchable)
> Memory window 1: d2000000-d3fff000
> I/O window 0: 0000a400-0000a4ff
> I/O window 1: 0000a800-0000a8ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
> PostWrite+ 16-bit legacy interface ports at 0001
>
> The 'Memory at d0001000' does not appear in the regions marked as reserved
> by the BIOS (see the dmesg), so I tried 'reserve=0xd0001000,Ox5000', but
> this didn't change anything
>
> Also, apparently, from the dmesg, the Video RAM is mapped at 0xb0000000,
> well beyond the available RAM (703MB).
>
> Note that there is a second problem: a *** DANGER *** unable to remove
> socket power when the card is removed.
>
> I really don't know what to try next... so, do you have any idea ?
>
> Thanks,
>
> Nicolas.
>
> == dmesg:
>
> # dmesg
> Linux version 2.6.15-gentoo-r1 (root at AdJaXiO-TuX) (version gcc
> 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1,
> pie-8.7.7.1)) #11 SMP PREEMPT Mon Mar 6 17:53:11 CET 2006 BIOS-provided
> physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002bff0000 (usable)
> BIOS-e820: 000000002bff0000 - 000000002bffffc0 (ACPI data)
> BIOS-e820: 000000002bffffc0 - 000000002c000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> 703MB LOWMEM available.
> On node 0 totalpages: 180208
> DMA zone: 4096 pages, LIFO batch:0
> DMA32 zone: 0 pages, LIFO batch:0
> Normal zone: 176112 pages, LIFO batch:31
> HighMem zone: 0 pages, LIFO batch:0
> DMI 2.3 present.
> ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
> ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x2bffb0eb
> ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x2bfffa90
> ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x2bfffb20
> ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x2bfffb90
> ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x2bffb11f
> ACPI: DSDT (v001 TOSINV Avani2 0x00001004 MSFT 0x0100000e) @ 0x00000000
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 15:3 APIC version 20
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1 15:3 APIC version 20
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000)
> Built 1 zonelists
> Kernel command line: root=/dev/hda3
> mapped APIC to ffffd000 (fee00000)
> mapped IOAPIC to ffffc000 (fec00000)
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 65536 bytes)
> Detected 2800.629 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 708540k/720832k available (3439k kernel code, 11740k reserved,
> 1237k data, 240k init, 0k highmem) Checking if this processor honours the
> WP bit even in supervisor mode... Ok. Calibrating delay using timer
> specific routine.. 5605.93 BogoMIPS (lpj=11211876) Mount-cache hash table
> entries: 512
> CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
> 0000459d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff
> 00000000 00000000 00000000 0000459d 00000000 00000000 monitor/mwait feature
> present.
> using mwait in idle threads.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000459d
> 00000000 00000000 Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU0: Thermal monitoring enabled
> mtrr: v2.0 (20020519)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04
> Booting processor 1/1 eip 2000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 5600.65 BogoMIPS
> (lpj=11201306) CPU: After generic identify, caps: bfebfbff 00000000
> 00000000 00000000 0000459d 00000000 00000000 CPU: After vendor identify,
> caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
> monitor/mwait feature present.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000459d
> 00000000 00000000 Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#1.
> CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU1: Thermal monitoring enabled
> CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04
> Total of 2 processors activated (11206.59 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking TSC synchronization across 2 CPUs: passed.
> Brought up 2 CPUs
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xe9964, last bus=2
> PCI: Using configuration type 1
> ACPI: Subsystem revision 20050902
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
> Boot video device is 0000:01:05.0
> PCI: Transparent bridge - 0000:00:14.4
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> ACPI: PCI Interrupt Link [LNK0] (IRQs 5 7 10 *11)
> ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 *11)
> ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 10 11)
> ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11)
> ACPI: Embedded Controller [EC0] (gpe 7)
> ACPI: Power Resource [PUT2] (on)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> ACPI: Power Resource [PFA1] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 11 devices
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
> pnp: 00:06: ioport range 0x200-0x20f has been reserved
> pnp: 00:06: ioport range 0x280-0x29f has been reserved
> pnp: 00:06: ioport range 0x40b-0x40b has been reserved
> PCI: Bridge: 0000:00:01.0
> IO window: c000-dfff
> MEM window: e0000000-efffffff
> PREFETCH window: a0000000-afffffff
> PCI: Bus 3, cardbus bridge: 0000:02:06.0
> IO window: 0000a400-0000a4ff
> IO window: 0000a800-0000a8ff
> PREFETCH window: 90000000-91ffffff
> MEM window: d2000000-d3ffffff
> PCI: Bridge: 0000:00:14.4
> IO window: a000-bfff
> MEM window: d0000000-dfffffff
> PREFETCH window: 90000000-9fffffff
> ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 16
> Simple Boot Flag at 0x37 set to 0x80
> Machine check exception polling timer started.
> audit: initializing netlink socket (disabled)
> audit(1141737681.756:1): initialized
> Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
> NTFS driver 2.1.25 [Flags: R/W].
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> fakephp: Fake PCI Hot Plug Controller Driver
> cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
> ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp_glue: can't get bus number, assuming 0
> acpiphp_ibm: ibm_find_acpi_device: Failed to get device
> information<3>acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
> cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
> cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
> cpcihp_generic: not configured, disabling.
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> ACPI: AC Adapter [AC] (on-line)
> ACPI: Battery Slot [BAT1] (battery present)
> ACPI: Power Button (FF) [PWRF]
> ACPI: Lid Switch [LID]
> ACPI: Power Button (CM) [PWRB]
> ACPI: Fan [FAN1] (off)
> ACPI: Thermal Zone [THZN] (69 C)
> toshiba: not a supported Toshiba laptop
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected Ati IGP7000/M chipset
> agpgart: AGP aperture is 64M @ 0xb0000000
> [drm] Initialized drm 1.0.0 20040925
> ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 17
> [drm] Initialized radeon 1.19.0 20050911 on minor 0:
> PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
> ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 18
> ACPI: PCI interrupt for device 0000:00:14.6 disabled
> mice: PS/2 mouse device common for all mice
> 8139too Fast Ethernet driver 0.9.27
> ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 18 (level, low) -> IRQ 19
> eth0: RealTek RTL8139 at 0xa000, 00:a0:d1:dc:e0:de, IRQ 19
> eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> orinoco 0.15rc3 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin
> <proski at gnu.org>, et al) orinoco_cs 0.15rc3 (David Gibson
> <hermes at gibson.dropbear.id.au>, Pavel Roskin <proski at gnu.org>, et al)
> Loaded prism54 driver, version 1.2
> hostap_plx: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi>)
> hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi>)
> Linux video capture interface: v1.00
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> input: AT Translated Set 2 keyboard as /class/input/input0
> hda: TOSHIBA MK4025GAS, ATA DISK drive
> Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
> synaptics: Toshiba Satellite Pro A60 detected, limiting rate to 40pps.
> input: SynPS/2 Synaptics TouchPad as /class/input/input1
> Probing IDE interface ide1...
> hdc: DW-224E-B, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 78140160 sectors (40007 MB), CHS=65535/16/63
> hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
> hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1654kB Cache
> Uniform CD-ROM driver Revision: 3.20
> ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 16
> Yenta: CardBus bridge found at 0000:02:06.0 [1179:ff10]
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:02:06.0, mfunc 0x01111122, devctl 0x64
> Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
> Socket status: 30000020
> pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
> pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xdfffffff
> pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff
> usbmon: debugfs is not available
> PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16
> ehci_hcd 0000:00:13.2: EHCI Host Controller
> ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:13.2: irq 16, io mem 0x30000000
> ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 6 ports detected
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:13.0: irq 16, io mem 0xf0001000
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: irq 16, io mem 0xf0002000
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 3 ports detected
> USB Universal Host Controller Interface driver v2.3
> usb 2-1: new low speed USB device using ohci_hcd and address 2
> pccard: CardBus card inserted into slot 0
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> input: Logitech USB Receiver as /class/input/input2
> input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> i2c /dev entries driver
> Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07
> 13:30:21 2005 UTC). ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level,
> low) -> IRQ 18 atiixp: codec reset timeout
> ALSA device list:
> #0: ATI IXP rev 0 with ALC250 at 0xf0000400, irq 18
> oprofile: using NMI interrupt.
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
> TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> ip_conntrack version 2.4 (5631 buckets, 45048 max) - 212 bytes per
> conntrack ip_tables: (C) 2000-2002 Netfilter core team
> ipt_recent v0.3.1: Stephen Frost <sfrost at snowman.net>.
> http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S.
> Miller
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> ieee80211: 802.11 data/management/control stack, git-1.1.7
> ieee80211: Copyright (C) 2004-2005 Intel Corporation
> <jketreno at linux.intel.com> ieee80211_crypt: registered algorithm 'NULL'
> ieee80211_crypt: registered algorithm 'WEP'
> ieee80211_crypt: registered algorithm 'CCMP'
> p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
> Starting balanced_irq
> Using IPI Shortcut mode
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 240k freed
> Adding 1004052k swap on /dev/hda2. Priority:-1 extents:1 across:1004052k
> EXT3 FS on hda3, internal journal
> cdrom: open failed.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
> eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
> ACPI-0258: *** Error: Thread 1691 cannot release Mutex [MUT1] acquired by
> thread 1699 ACPI-0508: *** Error: Method execution failed [\_SB_.RDEC]
> (Node ebfc8860), AE_AML_NOT_OWNER ACPI-0508: *** Error: Method execution
> failed [\_SB_.AC__._PSR] (Node ebfc3b00), AE_AML_NOT_OWNER ACPI-0258: ***
> Error: Thread 1691 cannot release Mutex [MUT1] acquired by thread 1699
> ACPI-0508: *** Error: Method execution failed [\_SB_.RDEC] (Node ebfc8860),
> AE_AML_NOT_OWNER ACPI-0508: *** Error: Method execution failed
> [\_SB_.BAT1._BST] (Node ebfc39c0), AE_AML_NOT_OWNER pccard: card ejected
> from slot 0
> PCMCIA: socket c1757828: *** DANGER *** unable to remove socket power
> pccard: CardBus card inserted into slot 0
> pccard: card ejected from slot 0
>
>
> == Output of lspci -vv:
>
> # lspci -vv
> 00:00.0 Host bridge: ATI Technologies Inc R200 AGP Bridge [Mobility Radeon
> 7000 IGP] (rev 05) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF-
> FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 64
> Region 0: Memory at b0000000 (32-bit, prefetchable) [size=64M]
> Region 1: Memory at b4000000 (32-bit, prefetchable) [size=4K]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA-
> AGP- GART64- 64bit- FW- Rate=<none>
>
> 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] (prog-if 00
> [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF-
> FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 0000c000-0000dfff
> Memory behind bridge: e0000000-efffffff
> Prefetchable memory behind bridge: a0000000-afffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+
> MAbort- >Reset- FastB2B-
>
> 00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev
> 01) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Unknown
> device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache
> Line Size 20
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at f0001000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev
> 01) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Unknown
> device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache
> Line Size 20
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at f0002000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01)
> (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems Unknown device
> ff10 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache
> Line Size 20
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
>
> 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 18)
> Subsystem: Toshiba America Info Systems Unknown device ff10
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports
> at e000 [size=16]
> Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=1K]
>
> 00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master PCI
> IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Toshiba America
> Info Systems Unknown device ff10 Control: I/O+ Mem- BusMaster+ SpecCycle-
> MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz-
> UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR-
> <PERR- Latency: 64
> Interrupt: pin A routed to IRQ 0
> Region 0: I/O ports at <unassigned>
> Region 1: I/O ports at <unassigned>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at 8070 [size=16]
>
> 00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c
> Subsystem: Toshiba America Info Systems Unknown device ff10
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
>
> 00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342 (prog-if 01
> [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF-
> FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
> I/O behind bridge: 0000a000-0000bfff
> Memory behind bridge: d0000000-dfffffff
> Prefetchable memory behind bridge: 90000000-9fffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA-
> MAbort- >Reset- FastB2B-
>
> 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97
> Audio Controller Subsystem: Toshiba America Info Systems Unknown device
> ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr-
> DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns
> min), Cache Line Size 08
> Interrupt: pin B routed to IRQ 10
> Region 0: Memory at f0000400 (32-bit, non-prefetchable) [size=256]
>
> 00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) (prog-if 00
> [Generic]) Subsystem: Toshiba America Info Systems Unknown device 0001
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr-
> DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B
> routed to IRQ 10
> Region 0: Memory at f0000500 (32-bit, non-prefetchable) [size=256]
>
> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility
> 7000 IGP (prog-if 00 [VGA]) Subsystem: Toshiba America Info Systems Unknown
> device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns
> min), Cache Line Size 08
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at a0000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at c000 [size=256]
> Region 2: Memory at e0000000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at a8000000 [disabled] [size=128K]
> Capabilities: [58] AGP version 2.0
> Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+
> AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management
> version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
> Controller (rev 02) Subsystem: Toshiba America Info Systems Unknown device
> ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache
> Line Size 20
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
> Memory window 0: 90000000-91fff000 (prefetchable)
> Memory window 1: d2000000-d3fff000
> I/O window 0: 0000a400-0000a4ff
> I/O window 1: 0000a800-0000a8ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt-
> PostWrite+ 16-bit legacy interface ports at 0001
>
> 02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10) Subsystem: Toshiba America Info Systems
> Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF-
> FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at a000 [size=256]
> Region 1: Memory at d0008000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
> Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info
> Systems Unknown device ff10 Control: I/O- Mem+ BusMaster+ SpecCycle-
> MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz-
> UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 64 (500ns min, 1000ns max), Cache Line Size 08
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=2K]
> Region 1: Memory at d0004000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
>
> == Content of /proc/iomem:
>
> # cat /proc/iomem
> 00000000-0009fbff : System RAM
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000cefff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-2bfeffff : System RAM
> 00100000-004264fe : Kernel code
> 004264ff-005326d3 : Kernel data
> 2bff0000-2bffffbf : ACPI Tables
> 2bffffc0-2bffffff : ACPI Non-volatile Storage
> 30000000-30000fff : 0000:00:13.2
> 30000000-30000fff : ehci_hcd
> 90000000-9fffffff : PCI Bus #02
> 90000000-91ffffff : PCI CardBus #03
> a0000000-afffffff : PCI Bus #01
> a0000000-a7ffffff : 0000:01:05.0
> a8000000-a801ffff : 0000:01:05.0
> b0000000-b3ffffff : 0000:00:00.0
> b4000000-b4000fff : 0000:00:00.0
> d0000000-dfffffff : PCI Bus #02
> d0000000-d00007ff : 0000:02:0a.0
> d0001000-d0001fff : 0000:02:06.0
> d0001000-d0001fff : yenta_socket
> d0004000-d0007fff : 0000:02:0a.0
> d0008000-d00080ff : 0000:02:07.0
> d0008000-d00080ff : 8139too
> d2000000-d3ffffff : PCI CardBus #03
> e0000000-efffffff : PCI Bus #01
> e0000000-e000ffff : 0000:01:05.0
> f0000000-f00003ff : 0000:00:14.0
> f0000400-f00004ff : 0000:00:14.5
> f0000400-f00004ff : ATI IXP AC97
> f0000500-f00005ff : 0000:00:14.6
> f0001000-f0001fff : 0000:00:13.0
> f0001000-f0001fff : ohci_hcd
> f0002000-f0002fff : 0000:00:13.1
> f0002000-f0002fff : ohci_hcd
> fff80000-ffffffff : reserved
>
> _______________________________________________
> Linux PCMCIA reimplementation list
> http://lists.infradead.org/mailman/listinfo/linux-pcmcia
More information about the linux-pcmcia
mailing list