[RFC][PATCH] pcmcia/yenta: do power-up only after socket is configured

[Daniel Ritz]

> Could this be a solver for my earlier posted problem were the USB device
> wouldn't come up right after an eject/insert with pccardctl?

well, could be. it could actually prevent interrupt storms during power-up.
the power-down case is unchanged. may be you could try it?

looking at your problem: there's no interrupt storm as far as i can see...
could you give me a full dmesg, lspci -vvv and a dump of /proc/interrupts?

rgds
-daniel