[RFC][PATCH] pcmcia/yenta: do power-up only after socket isconfigured

[Sebastian Günther]

> -----Original Message-----
> From: Daniel Ritz [mailto:daniel.ritz-ml at swissonline.ch]
> Sent: Monday, March 06, 2006 5:37 PM
> To: linux-pcmcia; Dominik Brodowski
> Subject: [RFC][PATCH] pcmcia/yenta: do power-up only after socket
> isconfigured
> 
> 
> [PATCH] pcmcia/yenta: do power-up only after socket is configured
> 
> power-up the card only after the socket is configured. power-down in
> the old place. the point is not to power-up the card before 
> the interrupt
> routing is set up correctly.
> 

Could this be a solver for my earlier posted problem were the USB device
wouldn't come up right after an eject/insert with pccardctl?

with kind regards

Sebastian Günther
network administrator

-- 
Qosmotec Software Solutions GmbH     QQQQ       Tel: + 49.241.879 75 10
Schloss-Rahe-Strasse 15             Q _\ Q      Mob: + 49.177.657 76 69
52072 Aix La Chapelle (Aachen)      Q \ \Q      Fax: + 49.241.879 75 15
Germany                              QQ\_\      http://www.qosmotec.com