kernel 2.6.15 - no high memory space available

Thomas Moritz thm_ml at thmoritz.de
Wed Mar 1 10:18:42 EST 2006


Hello all,
here are the messages, when i starting pcmcia and yenta_socket:
(automatic word wrap disabled)

modprobe -r pcmcia
modprobe -r yenta_socket
modprobe pcmcia
modprobe yenta_socket

kernel: ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 18 (level, low) -> IRQ 169
kernel: Yenta: CardBus bridge found at 0000:01:06.0 [103c:08bc]
kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
kernel: Yenta: Routing CardBus interrupts to PCI
kernel: Yenta TI: socket 0000:01:06.0, mfunc 0x012c1202, devctl 0x64
kernel: Yenta: ISA IRQ mask 0x0c78, PCI irq 169
kernel: Socket status: 30000086
kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
kernel: cs: IO port probe 0x3000-0x3fff: clean.
kernel: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff
kernel: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
kernel: ACPI: PCI Interrupt 0000:01:06.1[A] -> GSI 18 (level, low) -> IRQ 169
kernel: Yenta: CardBus bridge found at 0000:01:06.1 [103c:08bc]
kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
kernel: Yenta: Routing CardBus interrupts to PCI
kernel: Yenta TI: socket 0000:01:06.1, mfunc 0x012c1202, devctl 0x64
kernel: Yenta: ISA IRQ mask 0x0c78, PCI irq 169
kernel: Socket status: 30000086
kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
kernel: cs: IO port probe 0x3000-0x3fff: clean.
kernel: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff
kernel: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff

No i inserting a ide-card 16MB: (for demo only)
===============================================
kernel: pccard: PCMCIA card inserted into slot 0
kernel: cs: memory probe 0x90000000-0x903fffff: excluding 0x90000000-0x9003ffff 0x90080000-0x900bffff 0x90100000-0x9013ffff 0x90180000-0x901bffff 0x90200000-0x9023ffff 0x90280000-0x902bffff 0x90300000-0x9033ffff
kernel: pcmcia: registering new device pcmcia0.0
kernel: hde: ATA, CFA DISK drive
kernel: hdf: probing with STATUS(0x1e) instead of ALTSTATUS(0x0a)
kernel: hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
kernel: hdf: no response (status = 0xa0), resetting drive
kernel: hdf: probing with STATUS(0xe0) instead of ALTSTATUS(0x0a)
kernel: hdf: no response (status = 0xa0)
kernel: ide2 at 0x3100-0x3107,0x310e on irq 3
kernel: hde: max request size: 128KiB
kernel: hde: 31488 sectors (16 MB) w/1KiB Cache, CHS=246/4/32
kernel: hde: cache flushes not supported
kernel:  hde: hde1
kernel: ide-cs: hde: Vcc = 3.3, Vpp = 0.0
kernel:  hde: hde1

and no - pccardctl eject:-(
===========================
kernel: pccard: card ejected from slot 0
kernel: c0196c2f
kernel: Modules linked in: ide_cs appletalk ax25 ipx i915 drm button ac battery ipv6 michael_mic arc4 ieee80211_crypt_tkip snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss sr_mod sbp2 scsi_mod ipt_state ipt_REJECT ipt_LOG ipt_limit iptable_mangle iptable_nat ip_nat iptable_filter ip_conntrack_ftp ip_conntrack_irc ip_conntrack nfnetlink ip_tables eth1394 pcmcia ohci1394 ieee1394 ipw2200 ieee80211 ieee80211_crypt yenta_socket firmware_class rsrc_nonstatic pcmcia_core joydev irtty_sir sir_dev evdev irda crc_ccitt snd_intel8x0m snd_intel8x0 snd_ac97_codec snd_ac97_bus mousedev snd_pcm snd_timer snd soundcore snd_page_alloc parport_pc parport psmouse rtc serio_raw pcspkr shpchp pci_hotplug intel_agp agpgart ext3 jbd mbcache ide_cd cdrom ide_disk ide_generic piix generic ide_core b44 mii ehci_hcd uhci_hcd usbcore thermal processor fan
kernel: CPU:    0
kernel: EIP:    0060:[elv_queue_empty+23/43]    Not tainted VLI
kernel: EFLAGS: 00010046   (2.6.15-1-686)
kernel: EIP is at elv_queue_empty+0x17/0x2b
kernel: eax: 69766564   ebx: df69b084   ecx: c9cffd20   edx: cbe08500
kernel: esi: 00000001   edi: 00000008   ebp: 00000000   esp: c9cffce4
kernel: ds: 007b   es: 007b   ss: 0068
kernel: Process vol_id (pid: 13153, threadinfo=c9cfe000 task=c9ca1550)
kernel: Stack: 00000000 00000008 c0199417 df69b084 00000000 00000000 00007ad8 00000000
kernel:        e03b58c0 00000008 df69b084 00000100 de96d340 c0199941 df69b084 de96d340
kernel:        00000206 de96d340 c0132a27 df7aeec0 00011200 00000008 00000000 003a1892
kernel: Call Trace:
kernel:  [__make_request+152/1104] __make_request+0x98/0x450
kernel:  [generic_make_request+236/254] generic_make_request+0xec/0xfe
kernel:  [mempool_alloc+33/153] mempool_alloc+0x21/0x99
kernel:  [submit_bio+165/170] submit_bio+0xa5/0xaa
kernel:  [bio_alloc+19/34] bio_alloc+0x13/0x22
kernel:  [submit_bh+274/307] submit_bh+0x112/0x133
kernel:  [block_read_full_page+595/617] block_read_full_page+0x253/0x269
kernel:  [radix_tree_insert+102/249] radix_tree_insert+0x66/0xf9
kernel:  [add_to_page_cache_lru+24/45] add_to_page_cache_lru+0x18/0x2d
kernel:  [add_to_page_cache_lru+40/45] add_to_page_cache_lru+0x28/0x2d
kernel:  [do_generic_mapping_read+521/967] do_generic_mapping_read+0x209/0x3c7
kernel:  [blkdev_get_block+0/77] blkdev_get_block+0x0/0x4d
kernel:  [__generic_file_aio_read+329/404] __generic_file_aio_read+0x149/0x194
kernel:  [file_read_actor+0/182] file_read_actor+0x0/0xb6
kernel:  [generic_file_read+165/187] generic_file_read+0xa5/0xbb
kernel:  [autoremove_wake_function+0/58] autoremove_wake_function+0x0/0x3a
kernel:  [vfs_read+161/312] vfs_read+0xa1/0x138
kernel:  [sys_read+59/100] sys_read+0x3b/0x64
kernel:  [syscall_call+7/11] syscall_call+0x7/0xb
kernel: Code: 12 89 52 04 84 c0 79 0a a8 20 74 06 ff 83 60 01 00 00 5b c3 56 31 f6 53 8b 44 24 0c 8b 18 8b 50 0c 39 c3 75 15 8b 02 66 be 01 00 <8b> 48 1c 85 c9 74 08 89 5c 24 0c 5b 5e ff e1 5b 89 f0 5e c3 53


init 6 and then insert my SRamCard in slot 0 and slot 1
=======================================================
kernel: pccard: PCMCIA card inserted into slot 0
kernel: cs: memory probe 0x90000000-0x903fffff: excluding 0x90000000-0x903fffff
kernel: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
kernel: cs: warning: no high memory space available!
kernel: pccard: card ejected from slot 0

kernel: pccard: PCMCIA card inserted into slot 1
kernel: cs: memory probe 0x90000000-0x903fffff: excluding 0x90000000-0x903fffff
kernel: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
kernel: cs: warning: no high memory space available!
kernel: pccard: card ejected from slot 1

cat /proc/iomem  -> see previous mail

This type of cards are not working. Thats my biggest problem.
One of my cards i have send to a friend. He tries formatting 
this card with a old DOS-machine. My next test is the formatted card.
My cards in original are without filesystem! And this cards i 
must read and write with dd. [Only to bring back memories:-)]

I hope this helps.
Best regards Th. Moritz




More information about the linux-pcmcia mailing list