kernel 2.6.15 - no high memory space available

[Thomas Moritz]

Am Mittwoch, 1. März 2006 10:33 meinte Dominik Brodowski:

Hi,
>
> On Tue, Feb 21, 2006 at 12:41:37PM +0100, Thomas Moritz wrote:
> > kernel: cs: memory probe 0xa0000000-0xa0ffffff: excluding
> > 0xa0000000-0xa0ffffff kernel: cs: memory probe
> > 0x90000000-0x903fffff: excluding 0x90000000-0x903fffff kernel:
> > cs: memory probe 0x60000000-0x60ffffff: excluding
> > 0x60000000-0x60ffffff kernel: cs: memory probe
> > 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff kernel:
> > cs: warning: no high memory space available!
>
> What does /proc/iomem say?

cat /proc/iomem says: (meanwhile, i have updatet my system)

#################################################
cat /proc/iomem

00000000-0009fbff : System RAM
  00000000-00000000 : Crash kernel
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1f7cffff : System RAM
  00100000-00264506 : Kernel code
  00264507-002e9083 : Kernel data
1f7d0000-1f7f0bff : reserved
1f7f0c00-1f7fbfff : ACPI Non-volatile Storage
1f7fc000-1f7fffff : reserved
20000000-23ffffff : PCI Bus #01
  20000000-21ffffff : PCI CardBus #02
  22000000-23ffffff : PCI CardBus #06
24000000-240003ff : 0000:00:1f.1
26000000-27ffffff : PCI CardBus #02
28000000-29ffffff : PCI CardBus #06
90000000-903fffff : PCI Bus #01
  90000000-90003fff : 0000:01:0d.0
  90080000-90081fff : 0000:01:0e.0
    90080000-90081fff : b44
  90100000-90100fff : 0000:01:04.0
    90100000-90100fff : ipw2200
  90180000-90180fff : 0000:01:06.0
    90180000-90180fff : yenta_socket
  90200000-90200fff : 0000:01:06.1
    90200000-90200fff : yenta_socket
  90280000-90280fff : 0000:01:06.3
  90300000-903007ff : 0000:01:0d.0
    90300000-903007ff : ohci1394
90400000-9047ffff : 0000:00:02.0
90480000-904fffff : 0000:00:02.1
90500000-905003ff : 0000:00:1d.7
  90500000-905003ff : ehci_hcd
90600000-906001ff : 0000:00:1f.5
  90600000-906001ff : Intel 82801DB-ICH4
90680000-906800ff : 0000:00:1f.5
  90680000-906800ff : Intel 82801DB-ICH4
98000000-9fffffff : 0000:00:02.0
  98000000-987cffff : vesafb
a0000000-a7ffffff : 0000:00:02.1
#################################################

In the last time, i have insert a new harddisk for testing only.
Since update from sysfs, the "/pcmcia/config.opts" has no effect?
It's better, when i removing package "sysfs"? Or where can i setup 
the memory region?

Another question: Older kernel used "i82365" for my device. The last 
kernel 2.6.15 used "yenta_socket". Is this correct?

In the next mail, i will show all info with included sysfs.
modprobe pcmcia
modprobe yenta_socket
iomem

I hope it helps.

Thanks, Th. Moritz