ROTAC Cardbus bridge RL5c476 and pcmcia problem

Siddarth Gore siddarth.gore at gmail.com
Wed Jun 28 13:15:41 EDT 2006 

Hello,

I am trying to get the Netgear WAG511v2 wireless pcmcia card to work
on my Dell Desktop.

Configration::::::::::::
fedora core 3
2.6.15
pcmcia-cs-3.2.8
madwifi-ng-r1454
CBS52U Cardbus  PC Card Adapter

I am doing the following::::::::::
modprobe ath_pci
iwconfig

I dont see any error messages but nothing seems to be working. I am
new to this pcmcia stuff so any pointers will be much appriciated.

Outputs::::::::::

________iwconfig:

lo        no wireless extensions.

eth0      no wireless extensions.

sit0      no wireless extensions.

___________lspci -v:

03:02.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82)
    Flags: bus master, medium devsel, latency 168, IRQ 177
    Memory at dfc00000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
    Memory window 0: 30000000-31fff000 (prefetchable)
    Memory window 1: 34000000-35fff000
    I/O window 0: 0000d000-0000d0ff
    I/O window 1: 0000d400-0000d4ff
    16-bit legacy interface ports at 0001

03:02.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82)
    Flags: bus master, medium devsel, latency 168, IRQ 185
    Memory at dfc01000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=03, secondary=08, subordinate=0b, sec-latency=176
    Memory window 0: 32000000-33fff000 (prefetchable)
    Memory window 1: 36000000-37fff000
    I/O window 0: 0000d800-0000d8ff
    I/O window 1: 00001000-000010ff
    16-bit legacy interface ports at 0001


____________cardctl info:

PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255



________dmesg:
PCI: Calling quirk c0287eca for 0000:03:08.0
PCI: Calling quirk c0288019 for 0000:03:08.0
PCI: Fixups for bus 0000:03
PCI: Transparent bridge - 0000:00:1e.0
PCI: Scanning behind PCI bridge 0000:03: 02.0, config 000000, pass 0
PCI: Scanning behind PCI bridge 0000:03:02.1, config 000000, pass 0
PCI: Scanning behind PCI bridge 0000:03:02.0, config 000000, pass 1
PCI: Scanning behind PCI bridge 0000:03:02.1, config 000000, pass 1
PCI: Bus scan for 0000:03 returning with max=0b
PCI: Scanning behind PCI bridge 0000:00:1c.0, config 010100, pass 1
PCI: Scanning behind PCI bridge 0000:00:1c.1, config 020200, pass 1
PCI: Scanning behind PCI bridge 0000:00: 1e.0, config 030300, pass 1
PCI: Bus scan for 0000:00 returning with max=0b
PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0
PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 201
PCI->APIC IRQ transform: 0000:00: 1d.1[B] -> IRQ 209
PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 177
PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 217
PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 201
PCI->APIC IRQ transform: 0000:00: 1f.1[A] -> IRQ 161
PCI->APIC IRQ transform: 0000:00:1f.2[C] -> IRQ 193
PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 169
PCI->APIC IRQ transform: 0000:03:02.0[A] -> IRQ 177
PCI->APIC IRQ transform: 0000:03: 02.1[B] -> IRQ 185
PCI: using PPB 0000:00:1e.0[A] to get irq 23
PCI->APIC IRQ transform: 0000:03:08.0[A] -> IRQ 217
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: dfe00000-dfefffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: dfd00000-dfdfffff
  PREFETCH window: disabled.
  got res [dfc00000:dfc00fff] bus [dfc00000:dfc00fff] flags 200 for
BAR 0 of 0000:03: 02.0
PCI: moved device 0000:03:02.0 resource 0 (200) to dfc00000
  got res [dfc01000:dfc01fff] bus [dfc01000:dfc01fff] flags 200 for
BAR 0 of 0000:03:02.1
PCI: moved device 0000:03:02.1 resource 0 (200) to dfc01000
PCI: Bus 4, cardbus bridge: 0000:03:02.0
  IO window: 0000d000-0000d0ff
  IO window: 0000d400-0000d4ff
  PREFETCH window: 30000000-31ffffff
  MEM window: 34000000-35ffffff
PCI: Bus 8, cardbus bridge: 0000:03: 02.1
  IO window: 0000d800-0000d8ff
  IO window: 00001000-000010ff
  PREFETCH window: 32000000-33ffffff
  MEM window: 36000000-37ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: dfc00000-dfcfffff
  PREFETCH window: 30000000-33ffffff
PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Probably
buggy MP table.
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: No IRQ known for interrupt pin B of device 0000:00: 1c.1.
Probably buggy MP table.
<...snip...>
PCI: Calling quirk c01c9091 for 0000:03:08.0
PCI: Calling quirk c01c925f for 0000:03:08.0
PCI: Calling quirk c026d520 for 0000:03:08.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Yenta: CardBus bridge found at 0000:03:02.0 [0000:0000]
Yenta: ISA IRQ mask 0x0000, PCI irq 177
Socket status: 30000820
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
cs: IO port probe 0xd000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
Yenta: CardBus bridge found at 0000:03: 02.1 [0000:0000]
Yenta: ISA IRQ mask 0x0000, PCI irq 185
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
cs: IO port probe 0xd000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
ds: ds_open(socket 0)
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please
expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
for details.
cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc7f
cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc7f
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ds: ds_open(socket 1)
ds: ds_open(socket 2)
ds: ds_release(socket 0)
ds: ds_release(socket 1)
ds: ds_open(socket 0)
ds: ds_open(socket 1)
ds: ds_open(socket 2)
ds: ds_open(socket 2)
lp: driver loaded but no devices found
[drm] Initialized i915 1.1.0 20040405 on minor 0:
mtrr: base(0xc0020000) is not aligned on a size(0x258000) boundary
ds: ds_open(socket 0)
ds: ds_open(socket 1)
ds: ds_open(socket 2)
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (svn 1454)
ath_rate_sample: 1.2 (svn 1454)
ath_pci: 0.9.4.5 (svn 1454)



-siddarth

-- 
First they ignore you, then they laugh at you, then they fight you,
then you win.
Mohandas Gandhi

More information about the linux-pcmcia mailing list