Card does only work after reinsert

[Larry Finger]

Daniel Ritz wrote:
> 
> had a look at those. but it does not show anything obvious. i have a
> somewhat older o2micro bridge which works perfectly normal. do you
> have windows running on the box? if so, could you get a register dump
> of the cardbus bridge? there's tool for that called WPCredit.
> 
> could you also try with this in modprobe.conf
> 	options yenta_socket isa_probe=N

Sorry to take so long to get back to you, but my copy of Windows was down
for a while.

The change in modprobe.conf had no effect.

The output of WPcredit is as follows:

----------------------------------------------------------
WPCREDIT Version 1.4  / Copyright (c) 1998-2004  By H.Oda!
----------------------------------------------------------
PCI Bus : 0    Vendor ID: 1217
Device  : 10   Device ID: 6972
Function: 0    Revision : 00   Card bus Bridge
----------------------------------------------------------
       00 01 02 03 04 05 06 07  08 09 0A 0B 0C 0D 0E 0F
     + -- -- -- -- -- -- -- --  -- -- -- -- -- -- -- --
  00 | 17 12 72 69 87 00 10 04  00 00 07 06 00 40 02 00
  10 | 00 F0 DF FE A0 00 00 02  00 02 02 40 00 E0 DF FE
  20 | 00 E0 DF FE 00 E0 DF FA  00 D0 DF FE 01 FE 00 00
  30 | FD FE 00 00 01 FD 00 00  FD FD 00 00 0B 01 C0 00
  40 | 3C 10 22 00 01 00 00 00  00 00 00 00 00 00 00 00
  50 | 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  60 | 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  70 | 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  80 | 00 00 00 00 00 00 00 00  00 00 00 00 82 18 8C 08
  90 | 02 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  A0 | 01 00 02 FE 00 40 C0 00  00 00 00 00 1D 00 00 00
  B0 | 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  C0 | 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  D0 | 00 40 00 08 EA 03 82 02  00 00 00 00 00 00 00 00
  E0 | 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  F0 | 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
----------------------------------------------------------


Thanks,

Larry