Card does only work after reinsert

Daniel Ritz daniel.ritz-ml at swissonline.ch
Sat Jul 22 17:51:47 EDT 2006


On Sunday 16 July 2006 18.35, Larry Finger wrote:
> Daniel Ritz wrote:
> > hello
> > 
> > please post full dmesg, lspci and lspci -vvvxxx
> > 
> > rgds
> > -daniel
> > 
> 
> Attached are the dmesg after the first insert of the card, and the output from 'lspci' and 'lspci 
> -vvvxxx' for the first and second insertions of the card. The card was not recognized on the first 
> insertion, but was on the second. The dmesg after the second insertion is completely filled with a 
> the dump of a deadlock that is not relevant.

had a look at those. but it does not show anything obvious. i have a
somewhat older o2micro bridge which works perfectly normal. do you
have windows running on the box? if so, could you get a register dump
of the cardbus bridge? there's tool for that called WPCredit.

could you also try with this in modprobe.conf
	options yenta_socket isa_probe=N

rgds
-daniel



More information about the linux-pcmcia mailing list