Sycard PCCHost 1420 troubles

[N. French]

No change.

Thanks,

Nathan

--- Dominik Brodowski <linux at dominikbrodowski.net> wrote:

> Hi,
> 
> On Mon, Jan 09, 2006 at 07:48:34AM -0800, N. French wrote:
> > I'm having trouble getting a Sycard PCCHost 1420 (TI1420 chipset)
> > PCI-cardbus bridge working in a regular desktop PC (FC4, 2.6.14)
> using
> > the kernel supported module (yenta).  Here's what I'm seeing:
> > 
> > Yenta: CardBus bridge found at 0000:04:00.0 [0000:0000]
> > Yenta: Enabling burst memory read transactions
> > Yenta: Using CSCINT to route CSC interrupts to PCI
> > Yenta: Routing CardBus interrupts to PCI
> > Yenta TI: socket 0000:04:00.0, mfunc 0x00001000, devctl 0x66
> > Yenta TI: socket 0000:04:00.0 probing PCI interrupt failed, trying
> to
> > fix
> > Yenta TI: socket 0000:04:00.0 falling back to parallel PCI
> interrupts
> > Yenta TI: socket 0000:04:00.0 no PCI interrupts. Fish. Please
> report.
> > Yenta: no PCI IRQ, CardBus support disabled for this socket.
> > Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
> > Yenta: ISA IRQ mask 0x0000, PCI irq 0
> > Yenta: CardBus bridge found at 0000:04:00.1 [0000:0000]
> > Yenta: Using CSCINT to route CSC interrupts to PCI
> > Yenta: Routing CardBus interrupts to PCI
> > Yenta TI: socket 0000:04:00.1, mfunc 0x00001000, devctl 0x64
> > Yenta TI: socket 0000:04:00.1 probing PCI interrupt failed, trying
> to
> > fix
> > Yenta TI: socket 0000:04:00.1 no PCI interrupts. Fish. Please
> report.
> > Yenta: no PCI IRQ, CardBus support disabled for this socket.
> > Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
> > Yenta: ISA IRQ mask 0x0000, PCI irq 0
> 
> What happens if you append the "pci=assign-busses" boot parameter?
> 
> 	Dominik
> 



		
__________________________________________ 
Yahoo! DSL – Something to write home about. 
Just $16.99/mo. or less. 
dsl.yahoo.com