Sycard PCCHost 1420 troubles

[Dominik Brodowski]

Hi,

On Mon, Jan 09, 2006 at 07:48:34AM -0800, N. French wrote:
> I'm having trouble getting a Sycard PCCHost 1420 (TI1420 chipset)
> PCI-cardbus bridge working in a regular desktop PC (FC4, 2.6.14) using
> the kernel supported module (yenta).  Here's what I'm seeing:
> 
> Yenta: CardBus bridge found at 0000:04:00.0 [0000:0000]
> Yenta: Enabling burst memory read transactions
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:04:00.0, mfunc 0x00001000, devctl 0x66
> Yenta TI: socket 0000:04:00.0 probing PCI interrupt failed, trying to
> fix
> Yenta TI: socket 0000:04:00.0 falling back to parallel PCI interrupts
> Yenta TI: socket 0000:04:00.0 no PCI interrupts. Fish. Please report.
> Yenta: no PCI IRQ, CardBus support disabled for this socket.
> Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
> Yenta: ISA IRQ mask 0x0000, PCI irq 0
> Yenta: CardBus bridge found at 0000:04:00.1 [0000:0000]
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:04:00.1, mfunc 0x00001000, devctl 0x64
> Yenta TI: socket 0000:04:00.1 probing PCI interrupt failed, trying to
> fix
> Yenta TI: socket 0000:04:00.1 no PCI interrupts. Fish. Please report.
> Yenta: no PCI IRQ, CardBus support disabled for this socket.
> Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
> Yenta: ISA IRQ mask 0x0000, PCI irq 0

What happens if you append the "pci=assign-busses" boot parameter?

	Dominik