error on Yenta TI: no PCI interrupts. Fish. Please report.

kai.springer at arcor.de kai.springer at arcor.de
Sun Oct 23 08:25:16 EDT 2005 

Hi,

I’m trying to get my D-Link DWL-G650+ pcmcia wireless card running on Kubuntu Breezy Badger. I’ve already tried to install the windows drivers with ndiswrapper but it still doesn’t work. As the card doesn’t show any lights I suppose there’s no power on the interface. When I try a dmesg it tells me “[4294701.289000] Yenta TI: socket 0000:00:09.0, mfunc 0x01021c02, devctl 0x44

[4294701.390000] Yenta TI: socket 0000:00:09.0 probing PCI interrupt failed, trying to fix

[4294701.491000] Yenta TI: socket 0000:00:09.0 no PCI interrupts. Fish. Please report.” and as I’ve read on other newsgroups I thought it would be best to ask you. So if you could help me getting my wlan adapter working I’d be really pleased.

 

I’m using a BenQ Joybook R22E and Kubuntu Breezy Badger 5.10 with KDE 3.4 without any changes as I can’t connect to the internet.

 

Here’s the complete output from dmesg:

 

kai at ubuntu:~$ dmesg

94667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[4294667.296000] ACPI: IRQ0 used by override.

[4294667.296000] ACPI: IRQ2 used by override.

[4294667.296000] ACPI: IRQ9 used by override.

[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[4294667.296000] Using ACPI (MADT) for SMP configuration information

[4294667.296000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3f80000)

[4294667.296000] Built 1 zonelists

[4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash

[4294667.296000] mapped APIC to ffffd000 (fee00000)

[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)

[4294667.296000] Initializing CPU#0

[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)

[4294667.296000] Detected 1604.393 MHz processor.

[4294667.296000] Using pmtmr for high-res timesource

[4294667.296000] Console: colour VGA+ 80x25

[4294670.211000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[4294670.211000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[4294670.220000] Memory: 446596k/458688k available (1415k kernel code, 11500k reserved, 763k data, 224k init, 0k highmem)

[4294670.220000] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[4294670.220000] Calibrating delay loop... 3178.49 BogoMIPS (lpj=1589248)

[4294670.244000] Security Framework v1.0.0 initialized

[4294670.244000] SELinux:  Disabled at boot.

[4294670.244000] Mount-cache hash table entries: 512

[4294670.244000] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001

[4294670.244000] CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001

[4294670.244000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[4294670.244000] CPU: L2 Cache: 256K (64 bytes/line)

[4294670.244000] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000010 00000000 00000000 00000001

[4294670.244000] CPU: AMD Mobile AMD Sempron(tm) Processor 2800+ stepping 00

[4294670.244000] Enabling fast FPU save and restore... done.

[4294670.244000] Enabling unmasked SIMD FPU exception support... done.

[4294670.244000] Checking 'hlt' instruction... OK.

[4294670.248000] Checking for popad bug... OK.

[4294670.248000] checking if image is initramfs... it is

[4294670.696000] Freeing initrd memory: 4824k freed

[4294670.697000] ACPI: Looking for DSDT in initrd... not found!

[4294670.754000]  not found!

[4294670.871000] ENABLING IO-APIC IRQs

[4294670.871000] ..TIMER: vector=0x31 pin1=2 pin2=-1

[4294670.983000] NET: Registered protocol family 16

[4294670.983000] EISA bus registered

[4294670.983000] ACPI: bus type pci registered

[4294670.983000] PCI: PCI BIOS revision 2.10 entry at 0xe8944, last bus=1

[4294670.983000] PCI: Using configuration type 1

[4294670.983000] mtrr: v2.0 (20020519)

[4294670.983000] ACPI: Subsystem revision 20050729

[4294670.987000] ACPI: Interpreter enabled

[4294670.987000] ACPI: Using IOAPIC for interrupt routing

[4294670.988000] ACPI: PCI Root Bridge [PCI0] (0000:00)

[4294670.988000] PCI: Probing PCI hardware (bus 00)

[4294670.988000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0

[4294670.988000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0

[4294670.989000] Boot video device is 0000:01:00.0

[4294671.000000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[4294671.002000] burst-mode-ec-10-Aug

[4294671.002000] ACPI: Embedded Controller [EC0] (gpe 1)

[4294671.002000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)

[4294671.002000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)

[4294671.002000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)

[4294671.003000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 14 15)

[4294671.003000] Linux Plug and Play Support v0.97 (c) Adam Belay

[4294671.003000] pnp: PnP ACPI init

[4294671.005000] pnp: PnP ACPI: found 8 devices

[4294671.005000] PnPBIOS: Disabled by ACPI PNP

[4294671.005000] PCI: Using ACPI for IRQ routing

[4294671.005000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

[4294671.009000] pnp: 00:05: ioport range 0x3f0-0x3f5 has been reserved

[4294671.009000] pnp: 00:05: ioport range 0x680-0x68f has been reserved

[4294671.009000] pnp: 00:05: ioport range 0x1000-0x107f could not be reserved

[4294671.009000] Simple Boot Flag at 0x37 set to 0x1

[4294671.009000] audit: initializing netlink socket (disabled)

[4294671.009000] audit: initialized

[4294671.009000] VFS: Disk quotas dquot_6.5.1

[4294671.009000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[4294671.009000] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)

[4294671.009000] devfs: boot_options: 0x0

[4294671.009000] Initializing Cryptographic API

[4294671.010000] isapnp: Scanning for PnP cards...

[4294671.363000] isapnp: No Plug & Play device found

[4294671.378000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[4294671.385000] i8042.c: Detected active multiplexing controller, rev 1.1.

[4294671.387000] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[4294671.388000] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[4294671.389000] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[4294671.389000] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[4294671.390000] serio: i8042 KBD port at 0x60,0x64 irq 1

[4294671.390000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled

[4294671.391000] io scheduler noop registered

[4294671.391000] io scheduler anticipatory registered

[4294671.391000] io scheduler deadline registered

[4294671.391000] io scheduler cfq registered

[4294671.392000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[4294671.393000] EISA: Probing bus 0 at eisa.0

[4294671.393000] Cannot allocate resource for EISA slot 1

[4294671.393000] EISA: Detected 0 cards.

[4294671.393000] NET: Registered protocol family 2

[4294671.404000] IP: routing cache hash table of 4096 buckets, 32Kbytes

[4294671.404000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[4294671.404000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

[4294671.404000] TCP: Hash tables configured (established 16384 bind 16384)

[4294671.404000] NET: Registered protocol family 8

[4294671.404000] NET: Registered protocol family 20

[4294671.405000] ACPI wakeup devices:

[4294671.405000] SBTN USB0 USB1 USB2 EHCI AC97 MC97 LAN0

[4294671.405000] ACPI: (supports S0 S3 S4 S5)

[4294671.405000] Freeing unused kernel memory: 224k freed

[4294671.417000] input: AT Translated Set 2 keyboard on isa0060/serio0

[4294671.419000] vga16fb: initializing

[4294671.419000] vga16fb: mapped to 0xc00a0000

[4294671.578000] Console: switching to colour frame buffer device 80x30

[4294671.578000] fb0: VGA16 VGA frame buffer device

[4294672.692000] Capability LSM initialized

[4294672.702000] NET: Registered protocol family 1

[4294672.716000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[4294672.716000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

[4294672.716000] ACPI: bus type ide registered

[4294672.722000] VP_IDE: IDE controller at PCI slot 0000:00:11.1

[4294672.722000] ACPI: PCI Interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 20

[4294672.722000] PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 4

[4294672.722000] VP_IDE: chipset revision 6

[4294672.722000] VP_IDE: not 100% native mode: will probe irqs later

[4294672.722000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1

[4294672.722000]     ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio

[4294672.722000]     ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio

[4294672.722000] Probing IDE interface ide0...

[4294673.106000] hda: FUJITSU MHT2040AT, ATA DISK drive

[4294673.720000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

[4294673.720000] Probing IDE interface ide1...

[4294674.512000] hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive

[4294674.818000] ide1 at 0x170-0x177,0x376 on irq 15

[4294674.818000] Probing IDE interface ide2...

[4294675.331000] Probing IDE interface ide3...

[4294675.843000] Probing IDE interface ide4...

[4294676.355000] Probing IDE interface ide5...

[4294676.870000] hda: max request size: 128KiB

[4294676.932000] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)

[4294676.934000] hda: cache flushes supported

[4294676.934000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 >

[4294676.969000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache

[4294676.969000] Uniform CD-ROM driver Revision: 3.20

[4294677.208000] Attempting manual resume

[4294677.238000] swsusp: Suspend partition has wrong signature?

[4294677.303000] usbcore: registered new driver usbfs

[4294677.303000] usbcore: registered new driver hub

[4294677.304000] USB Universal Host Controller Interface driver v2.2

[4294677.304000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21

[4294677.304000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5

[4294677.304000] uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller

[4294677.366000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1

[4294677.366000] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001200

[4294677.366000] hub 1-0:1.0: USB hub found

[4294677.366000] hub 1-0:1.0: 2 ports detected

[4294677.369000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21

[4294677.369000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5

[4294677.369000] uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)

[4294677.431000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2

[4294677.431000] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001300

[4294677.431000] hub 2-0:1.0: USB hub found

[4294677.431000] hub 2-0:1.0: 2 ports detected

[4294677.434000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21

[4294677.434000] uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)

[4294677.496000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3

[4294677.496000] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001700

[4294677.496000] hub 3-0:1.0: USB hub found

[4294677.496000] hub 3-0:1.0: 2 ports detected

[4294677.521000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21

[4294677.521000] PCI: Via IRQ fixup for 0000:00:10.3, from 7 to 5

[4294677.521000] ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0

[4294677.521000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4

[4294677.521000] ehci_hcd 0000:00:10.3: irq 21, io mem 0xf0000000

[4294677.521000] ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004

[4294677.521000] hub 4-0:1.0: USB hub found

[4294677.521000] hub 4-0:1.0: 6 ports detected

[4294677.579000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker

[4294677.579000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23

[4294677.579000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 7

[4294677.583000] eth0: VIA Rhine II at 0x1e200, 00:40:d0:6d:68:c0, IRQ 23.

[4294677.583000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.

[4294679.975000] ACPI: CPU0 (power states: C1[C1] C2[C2])

[4294679.978000] ACPI: Thermal Zone [TZ0] (52 C)

[4294680.165000] Attempting manual resume

[4294680.165000] swsusp: Suspend partition has wrong signature?

[4294680.186000] kjournald starting.  Commit interval 5 seconds

[4294680.186000] EXT3-fs: mounted filesystem with ordered data mode.

[4294681.666000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27

[4294685.124000] Adding 626492k swap on /dev/hda5.  Priority:-1 extents:1

[4294685.405000] EXT3 FS on hda2, internal journal

[4294694.242000] lp: driver loaded but no devices found

[4294694.264000] mice: PS/2 mouse device common for all mice

[4294694.958000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0

[4294694.961000] input: SynPS/2 Synaptics TouchPad on isa0060/serio3

[4294695.218000] ts: Compaq touchscreen protocol output

[4294697.313000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com

[4294698.173000] cdrom: open failed.

[4294700.745000] Linux agpgart interface v0.101 (c) Dave Jones

[4294700.753000] agpgart: Detected AGP bridge 0

[4294700.777000] agpgart: AGP aperture is 256M @ 0xb0000000

[4294701.183000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[4294701.189000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5

[4294701.189000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5

[4294701.277000] Linux Kernel Card Services

[4294701.277000]   options:  [pci] [cardbus] [pm]

[4294701.289000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17

[4294701.289000] Yenta: CardBus bridge found at 0000:00:09.0 [1071:8889]

[4294701.289000] Yenta: Using CSCINT to route CSC interrupts to PCI

[4294701.289000] Yenta: Routing CardBus interrupts to PCI

[4294701.289000] Yenta TI: socket 0000:00:09.0, mfunc 0x01021c02, devctl 0x44

[4294701.390000] Yenta TI: socket 0000:00:09.0 probing PCI interrupt failed, trying to fix

[4294701.491000] Yenta TI: socket 0000:00:09.0 no PCI interrupts. Fish. Please report.

[4294701.611000] Yenta: ISA IRQ mask 0x0000, PCI irq 0

[4294701.611000] Socket status: 00000000

[4294701.902000] irda_init()

[4294701.902000] NET: Registered protocol family 23

[4294702.226000] via82xx: Assuming DXS channels with 48k fixed sample rate.

[4294702.226000]          Please try dxs_support=5 option

[4294702.226000]          and report if it works on your machine.

[4294702.226000]          For more details, read ALSA-Configuration.txt.

[4294702.226000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22

[4294702.226000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 6

[4294702.226000] PCI: Setting latency timer of device 0000:00:11.5 to 64

[4294703.367000] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22

[4294703.367000] PCI: Via IRQ fixup for 0000:00:11.6, from 5 to 6

[4294703.368000] PCI: Setting latency timer of device 0000:00:11.6 to 64

[4294705.420000] Real Time Clock Driver v1.12

[4294705.507000] input: PC Speaker

[4294709.325000] ACPI: AC Adapter [AC] (on-line)

[4294709.374000] ACPI: Battery Slot [BAT0] (battery present)

[4294709.393000] ACPI: Power Button (FF) [PWRF]

[4294709.393000] ACPI: Lid Switch [LID]

[4294709.393000] ACPI: Sleep Button (CM) [SBTN]

[4294709.493000] ibm_acpi: ec object not found

[4294709.608000] ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)

[4294715.469000] apm: BIOS not found.

[4294716.125000] cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7

[4294716.128000] cs: IO port probe 0xc00-0xcf7: clean.

[4294716.128000] cs: IO port probe 0xa00-0xaff: clean.

[4294716.376000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)

[4294716.378000] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x8 (1350 mV)

[4294716.378000] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)

[4294716.378000] cpu_init done, current fid 0x8, vid 0x8

[4294716.855000] Bluetooth: Core ver 2.7

[4294716.855000] NET: Registered protocol family 31

[4294716.855000] Bluetooth: HCI device and connection manager initialized

[4294716.855000] Bluetooth: HCI socket layer initialized

[4294716.890000] Bluetooth: L2CAP ver 2.7

[4294716.890000] Bluetooth: L2CAP socket layer initialized

[4294716.931000] Bluetooth: RFCOMM ver 1.5

[4294716.931000] Bluetooth: RFCOMM socket layer initialized

[4294716.931000] Bluetooth: RFCOMM TTY layer initialized

 

Thanks a lot

Kai

More information about the linux-pcmcia mailing list