Xircom pcmcia CEM56 eth/modem combo works on thinkpad 390 but not 600

[Daniel Ritz]

On Thursday 13 October 2005 18.03, Joseph Mack NA3T wrote:
> On Wed, 12 Oct 2005, Daniel Ritz wrote:
> 
> > On Wednesday 12 October 2005 14.25, Joseph Mack NA3T wrote:
> >> On Tue, 11 Oct 2005, Both Daniel Ritz and David Hinds wrote
> >>
> >>>> Is the winmodem likely to be causing problems in linux-2.6.13? If so, what do I do?
> >>
> >>> How about:
> >>>  exclude port 0x2f8-0x2ff
> >>> in /etc/pcmcia/config.opts?
> 
> > you're using pcmciautils...so you have to run pcmcia-socket-startup
> 
> I shoulda just rebooted :-)
> 
> > to write the new values. also after boot, to make sure it's setup, do a:
> > 	cat /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_setup_done
> > and:
> > 	cat /sys/class/pcmcia_socket/pcmcia_socket0/available_resources_io
> > to see the configured ranges
> 
> I run /sbin/pcmcia-socket-startup - available_resources_io 
> shows that I _haven't_ excluded the ports I excluded in 
> /etc/pcmcia/config.opts. (The card doesn't work either).
> 

ok, something strange in going on. please send my you config.opts (in private)

rgds
-daniel