atheros PCMCIA card not longer working with kernel >= 2.6.13-rc3

[Andrew de Quincey]

On Saturday 30 Jul 2005 18:39, Dominik Brodowski wrote:
> Oh, and can you try out this patch on top of the other one I sent out a few
> moments ago?
>
> Thanks,
> 	Dominik
>
>
>
> From: Dominik Brodowski <linux at dominikbrodowski.net>
>
> In yenta_socket, we default to using the resource setting of the CardBus
> bridge.  However, this is a PCI-bus-centric view of resources and thus
> needs to be converted to generic resources first.  Therefore, add a call to
> pcibios_bus_to_resource() call in between.  This function is a mere wrapper
> on x86 and friends, however on some others it already exists, is added in
> this patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc
> -- where is its pcibios_resource_to_bus() ?).

Hi - this seems to have done the trick. Attached is my dmesg.

thanks!
-------------- next part --------------
Total memory = 512MB; using 1024kB for hash table (at c0300000)
Linux version 2.6.13-rc4 (root at localhost) (gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) #2 Sat Jul 30 19:30:19 BST 2005
Found UniNorth memory controller & host bridge, revision: 210
Mapped at 0xfdeb5000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xfde35000
Processor NAP mode on idle enabled.
PowerMac motherboard: PowerBook G4 15"
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->1
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->1
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->1
via-pmu: Server Mode is disabled
PMU driver 2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=134, gen1=135
nvram: Active bank is: 1
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
On node 0 totalpages: 131072
  DMA zone: 131072 pages, LIFO batch:31
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda4 ro init=/bin/bash 
PowerMac using OpenPIC irq controller at 0x80040000
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc5e4000
OpenPIC timer frequency is 4.166666 MHz
PID hash table entries: 4096 (order: 12, 65536 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 18.432000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515072k available (1900k kernel code, 784k data, 132k init, 0k highmem)
AGP special page: 0xdffff000
Calibrating delay loop... 747.52 BogoMIPS (lpj=373760)
Mount-cache hash table entries: 512
device-tree: property "l2-cache" name conflicts with node in /cpus/PowerPC,G4 at 0
NET: Registered protocol family 16
PCI: Probing PCI hardware
Can't get bus-range for /pci at f2000000/cardbus at 13, assuming it starts at 0
PCI: Cannot allocate resource region 0 of device 0001:10:19.0
Apple USB OHCI 0001:10:19.0 disabled by firmware
Registering openpic with sysfs...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Thermal assist unit not available
Registering PowerMac CPU frequency driver
Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz
Initializing Cryptographic API
PCI: Enabling device 0000:00:10.0 (0006 -> 0007)
radeonfb (0000:00:10.0): Invalid ROM signature 303 should be0xaa55
radeonfb: Retreived PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=203.00 Mhz, System=392.00 MHz
radeonfb: PLL min 12000 max 35000
radeonfb: Monitor 1 type LCD found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb: Using Firmware dividers 0x0002008e from PPLL 0
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 160x53
Registered "ati" backlight controller,level: 15/15
radeonfb (0000:00:10.0): ATI Radeon NP 
Macintosh non-volatile memory driver v1.1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
MacIO PCI driver attached to Intrepid chipset
input: Macintosh mouse button emulation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
adb: finished probe task...
PCI: Enabling device 0002:24:0d.0 (0000 -> 0002)
ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
Probing IDE interface ide0...
hda: Hitachi HTS541080G9AT00, ATA DISK drive
hda: Enabling Ultra DMA 5
ide0 at 0xe100a000-0xe100a007,0xe100a160 on irq 39
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
Probing IDE interface ide1...
hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
hdc: Enabling MultiWord DMA 2
ide1 at 0xe1006000-0xe1006007,0xe1006160 on irq 24
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Apple USB OHCI 0001:10:19.0 disabled by firmware
PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
ohci_hcd 0001:10:1a.0: OHCI Host Controller
ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:10:1a.0: irq 29, io mem 0xa0003000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
ohci_hcd 0001:10:1b.0: OHCI Host Controller
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:1b.0: irq 63, io mem 0xa0002000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new full speed USB device using ohci_hcd and address 2
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
ohci_hcd 0001:10:1b.1: OHCI Host Controller
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
ohci_hcd 0001:10:1b.1: irq 63, io mem 0xa0001000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: new full speed USB device using ohci_hcd and address 3
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: new full speed USB device using ohci_hcd and address 4
usb 1-1: device descriptor read/8, error -71
usb 1-1: device descriptor read/8, error -71
usb 1-1: new full speed USB device using ohci_hcd and address 5
usb 1-2: new full speed USB device using ohci_hcd and address 6
input: USB HID v1.11 Keyboard [05ac:1000] on usb-0001:10:1a.0-1
input: USB HID v1.11 Mouse [05ac:1000] on usb-0001:10:1a.0-1
input: USB HID v1.10 Keyboard [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2
HID device not claimed by input or hiddev
input: USB HID v1.10 Device [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits
Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 132k init 4k chrp 32k prep
NET: Registered protocol family 1
Yenta: CardBus bridge found at 0001:10:13.0 [0000:0000]
PCI: Bus 17, cardbus bridge: 0001:10:13.0
  IO window: 00001000-000011ff
  IO window: 00001400-000015ff
  PREFETCH window: 90000000-9fffffff
  MEM window: f3000000-f33fffff
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0001:10:13.0, mfunc 0x00001002, devctl 0x60
Yenta: ISA IRQ mask 0x0000, PCI irq 53
Socket status: 30000087
pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff
pcmcia: parent PCI bridge Memory window: 0xf3000000 - 0xf3ffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xafffffff
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, REGOPS_FUNC)
wlan: 0.8.6.0 (EXPERIMENTAL)
ath_rate_sample: 1.2
ath_pci: 0.9.6.0 (EXPERIMENTAL)
PCI: Enabling device 0001:11:00.0 (0000 -> 0002)
Build date: Jul 30 2005
Debugging version (IEEE80211)
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: H/W encryption support: WEP AES AES_CCM TKIP
ath0: mac 5.6 phy 4.1 radio 4.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
Debugging version (ATH)
ath0: Atheros 5212: mem=0xf3000000, irq=53