Bug#303550: kernel-image-2.6.11-1-686: irq11 makes eth0 problems

[maximilian attems]

Hello Daniel,

Adding you and the pcmcia list to cc,
received another bug report concerning TI irq routing.
your patch don't seem to fix this PCI1250 rev2.
you'll find the bug report at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=303550

note that the previous bug report #270376 involved a PCI1220 (rev 02)
thanks a lot again for your help.
debian user seem to be a good user base for your patches. ;-)


--- reply to previous bug report follows

bonsoir philippe!

On Sun, 10 Apr 2005, Philippe Bourcier wrote:

> On Sat, Apr 09, 2005 at 09:52:53PM +0200, maximilian attems wrote:
> > could you tested the kernel-image at:
> > http://charm.itp.tuwien.ac.at/~mattems/
> 
> - the vga=791 boot parameter makes the system boot with a black
>   screen; if i switch to a console, i don't get one (graphical broken
>   screen);
> - the usb mouse doesn't work at all (console nor X);

sorry i don't get you now,
does this happen with any debian kernel or just with the one above?
have you installed hotplug? if not is mousedev and psmouse loaded?
can you send in the output of cat /proc/bus/input/devices
 
> Apr 10 14:34:55 ile kernel: Linux version 2.6.11-ti-fix (root at aipc54) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Fri Apr 8 19:47:44 CEST 2005
..
> Apr 10 14:34:55 ile kernel: Linux Kernel Card Services
> Apr 10 14:34:55 ile kernel: options:  [pci] [cardbus] [pm]
> Apr 10 14:34:55 ile kernel: PCI: Found IRQ 11 for device 0000:00:03.0
> Apr 10 14:34:55 ile kernel: Yenta: CardBus bridge found at 0000:00:03.0 [0000:0000]
> Apr 10 14:34:55 ile kernel: Yenta: Enabling burst memory read transactions
> Apr 10 14:34:55 ile kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
> Apr 10 14:34:55 ile kernel: Yenta: Routing CardBus interrupts to PCI
> Apr 10 14:34:55 ile kernel: Yenta TI: socket 0000:00:03.0, mfunc 0xcba97543, devctl 0x62
> Apr 10 14:34:55 ile kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11
> Apr 10 14:34:55 ile kernel: Socket status: 30000010
> Apr 10 14:34:55 ile kernel: PCI: Found IRQ 11 for device 0000:00:03.1
> Apr 10 14:34:55 ile kernel: Yenta: CardBus bridge found at 0000:00:03.1 [0000:0000]
> Apr 10 14:34:55 ile kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
> Apr 10 14:34:55 ile kernel: Yenta: Routing CardBus interrupts to PCI
> Apr 10 14:34:55 ile kernel: Yenta TI: socket 0000:00:03.1, mfunc 0xcba97543, devctl 0x62
> Apr 10 14:34:55 ile kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11
> Apr 10 14:34:55 ile kernel: Socket status: 30000010
..
> Apr 10 14:35:16 ile kernel: eth0: 3Com 3c589, io 0x310, irq 9, hw_addr 00:00:86:52:4B:CB
> Apr 10 14:35:16 ile kernel: 8K FIFO split 5:3 Rx:Tx, auto xcvr
> Apr 10 14:35:16 ile kernel: program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
> Apr 10 14:35:16 ile kernel: ttyS2 at I/O 0x3e8 (irq = 11) is a 16550A
> Apr 10 14:35:21 ile kernel: eth0: flipped to 10baseT
> Apr 10 14:35:23 ile xfs: ignoring font path element /usr/lib/X11/fonts/cyrillic/ (unreadable)
> Apr 10 14:35:23 ile xfs: ignoring font path element /usr/lib/X11/fonts/CID (unreadable)
> Apr 10 14:35:27 ile kernel: [<c01297b5>] __report_bad_irq+0x31/0x77
> Apr 10 14:35:27 ile kernel: [<c012985f>] note_interrupt+0x4c/0x71
> Apr 10 14:35:27 ile kernel: [<c0129476>] __do_IRQ+0x93/0xbd
> Apr 10 14:35:27 ile kernel: [<c0104b35>] do_IRQ+0x19/0x24
> Apr 10 14:35:27 ile kernel: [<c01038ba>] common_interrupt+0x1a/0x20
> Apr 10 14:35:27 ile kernel: [<c01189a4>] __do_softirq+0x2c/0x7d
> Apr 10 14:35:27 ile kernel: [<c0118a17>] do_softirq+0x22/0x26
> Apr 10 14:35:27 ile kernel: [<c0104b3a>] do_IRQ+0x1e/0x24
> Apr 10 14:35:27 ile kernel: [<c01038ba>] common_interrupt+0x1a/0x20
> Apr 10 14:35:27 ile kernel: eth0: interrupt(s) dropped!

urgs, thanks for your testing and feedback.
a++ maks