pci-to-pcmcia connection with "AirPrime 5220 EVDO"

[David Hinds]

On Fri, Nov 19, 2004 at 12:19:08PM -0500, Khamar, Kalpit K (Kalpit) wrote:

> # lspci
> 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
> 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
> 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
> 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
> 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
> 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
> 00:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
> 00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 06)
> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP 2X (rev 65)
> 02:03.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)

In 'lspci -v', find the PCI bus bridge with secondary bus = 2,
probably device 00:14.0.  Take the IO and memory ranges listed for
that bridge, edit /etc/pcmcia/config.opts, and replace all the default
port and memory ranges with just the ones from 'lspci'.

-- Dave