pci-to-pcmcia connection with "AirPrime 5220 EVDO"

[Khamar, Kalpit K (Kalpit)]

Hi Rohan and Dave,
I ran into same problem for AirPrime 5220 EVDO air card. I am able to make it working on my laptop but i can not make it working on my desktop.
My desktop did recognize cardbus correctly but any PCMCIA card i put, it's not recognise it.

# lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 06)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP 2X (rev 65)
02:03.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)


ANd below is the snapshot for dmesg


Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Yenta IRQ list 0000, PCI irq10
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x290-0x297 0x370-0x377 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.

Rohan did you make your EVDO card working on your desktop. If ys then any commets or info i can help to do that on my desktop.
Please let me know.
Thanks
Kalpit