buffer I/O error, trying to use SimpleTech compact flash via pcmcia

Russell King rmk+pcmcia at arm.linux.org.uk
Thu Jun 24 14:28:06 EDT 2004


On Thu, Jun 24, 2004 at 12:09:32PM -0600, Lloyd Carothers wrote:
> On Mon, 2004-06-21 at 17:36, Russell King wrote:
> > I'd suggest posting this to the linux-ide mailing list rather than the
> > PCMCIA list - I don't think this is specific to PCMCIA itself.
> 
> Russel,
> 
> I posted to linux-ide with no response. I'd like to point out that
> cardctl status shows:
> [bat dead], [bat low]
> which doesn't make since since there is no battery in these things

That's a little weird, because IO cards just don't report those things.

Could you grab the cbdump.c program from pcmcia.arm.linux.org.uk, and
dump out:

- cardctl status
- cardctl config
- cbdump

with the card inserted please?  We can then see exactly what state
the kernel thinks stuff should be in vs the state of the actual socket
itself.

Thanks.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core



More information about the linux-pcmcia mailing list