2.6.* PCMCIA Issue with two network cards.

[Russell King]

On Sat, Aug 07, 2004 at 12:33:26AM +0000, Craig Bergstrom wrote:
> I am writing to report a bug, maybe this will help someone fix this so that 
> other people dont run into the same problem.

You'll need to help us work out what's going wrong then.

> <6>cs: IO port probe 0x0300-0x031f: clean.
> <6>cs: IO port probe 0x0140-0x017f: clean.
> <6>cs: memory probe 0x0d0000-0x0dffff: clean.

Looks fine - 64K of memory space.

> <5>pcnet_cs: RequestWindow: Resource in use

This could be a failure to setup the window to read the MAC address,
or it could be a problem with setting up the window for the cards
shared memory.

> <6>eth0: NE2000 Compatible: io 0x300, irq 4, hw_addr 00:30:BD:11:E7:E9
> <6>input: AT Translated Set 2 keyboard on isa0060/serio0
> <5>cs: unable to map card memory!
> <5>cs: unable to map card memory!

And this could be because there's no more memory space left.  Please
send the contents of /proc/iomem after these messages have appeared.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core