[PATCH] nvme: simplify request ready check for pci
Keith Busch
kbusch at meta.com
Fri Mar 7 15:26:55 PST 2025
From: Keith Busch <kbusch at kernel.org>
The criteria for pci transports' request ready check is simpler than
fabrics. Move the pci check to a different function. This also makes the
existing ready check simpler since it doesn't need to repeatedly test if
the controller is a fabrics type.
Signed-off-by: Keith Busch <kbusch at kernel.org>
---
drivers/nvme/host/apple.c | 2 +-
drivers/nvme/host/core.c | 35 ++++++++++++++++-------------------
drivers/nvme/host/nvme.h | 10 +++++++++-
drivers/nvme/host/pci.c | 2 +-
4 files changed, 27 insertions(+), 22 deletions(-)
diff --git a/drivers/nvme/host/apple.c b/drivers/nvme/host/apple.c
index a060f69558e76..8009eba9dd205 100644
--- a/drivers/nvme/host/apple.c
+++ b/drivers/nvme/host/apple.c
@@ -750,7 +750,7 @@ static blk_status_t apple_nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
if (unlikely(!READ_ONCE(q->enabled)))
return BLK_STS_IOERR;
- if (!nvme_check_ready(&anv->ctrl, req, true))
+ if (!nvme_pci_check_ready(&anv->ctrl, req))
return nvme_fail_nonready_command(&anv->ctrl, req);
ret = nvme_setup_cmd(ns, req);
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f028913e2e622..6007cd7fdc3f4 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -780,25 +780,22 @@ bool __nvme_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
if (rq->q == ctrl->admin_q && (req->flags & NVME_REQ_USERCMD))
return false;
- if (ctrl->ops->flags & NVME_F_FABRICS) {
- /*
- * Only allow commands on a live queue, except for the connect
- * command, which is require to set the queue live in the
- * appropinquate states.
- */
- switch (state) {
- case NVME_CTRL_CONNECTING:
- if (blk_rq_is_passthrough(rq) && nvme_is_fabrics(req->cmd) &&
- (req->cmd->fabrics.fctype == nvme_fabrics_type_connect ||
- req->cmd->fabrics.fctype == nvme_fabrics_type_auth_send ||
- req->cmd->fabrics.fctype == nvme_fabrics_type_auth_receive))
- return true;
- break;
- default:
- break;
- case NVME_CTRL_DEAD:
- return false;
- }
+ /*
+ * Only allow commands on a live queue, except for the connect command,
+ * which is require to set the queue live in the appropinquate states.
+ */
+ switch (state) {
+ case NVME_CTRL_CONNECTING:
+ if (blk_rq_is_passthrough(rq) && nvme_is_fabrics(req->cmd) &&
+ (req->cmd->fabrics.fctype == nvme_fabrics_type_connect ||
+ req->cmd->fabrics.fctype == nvme_fabrics_type_auth_send ||
+ req->cmd->fabrics.fctype == nvme_fabrics_type_auth_receive))
+ return true;
+ break;
+ default:
+ break;
+ case NVME_CTRL_DEAD:
+ return false;
}
return queue_live;
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 7be92d07430e9..9f9e742c714da 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -849,11 +849,19 @@ static inline bool nvme_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
if (likely(state == NVME_CTRL_LIVE))
return true;
- if (ctrl->ops->flags & NVME_F_FABRICS && state == NVME_CTRL_DELETING)
+ if (state == NVME_CTRL_DELETING)
return queue_live;
return __nvme_check_ready(ctrl, rq, queue_live, state);
}
+static inline bool nvme_pci_check_ready(struct nvme_ctrl *ctrl,
+ struct request *rq)
+{
+ return likely(nvme_ctrl_state(ctrl) == NVME_CTRL_LIVE) ||
+ !(nvme_req(rq)->flags & NVME_REQ_USERCMD) ||
+ rq->q->disk;
+}
+
/*
* NSID shall be unique for all shared namespaces, or if at least one of the
* following conditions is met:
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 710f3dfef3663..f60e04ec8a246 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -972,7 +972,7 @@ static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
if (unlikely(!test_bit(NVMEQ_ENABLED, &nvmeq->flags)))
return BLK_STS_IOERR;
- if (unlikely(!nvme_check_ready(&dev->ctrl, req, true)))
+ if (unlikely(!nvme_pci_check_ready(&dev->ctrl, req)))
return nvme_fail_nonready_command(&dev->ctrl, req);
ret = nvme_prep_rq(dev, req);
--
2.47.1
More information about the Linux-nvme
mailing list