[PATCH v6 12/13] mtd: rawnand: brcmnand: Add support for getting ecc setting from strap

[William Zhang]

Hi Minquel,

On 2/29/24 02:31, Miquel Raynal wrote:
> Hi William,
> 
> william.zhang at broadcom.com wrote on Mon, 26 Feb 2024 12:05:18 -0800:
> 
>> On 2/26/24 00:36, Miquel Raynal wrote:
>>> Hi William,
>>>
>>> william.zhang at broadcom.com wrote on Fri, 23 Feb 2024 09:25:09 -0800:
>>>    
>>>> Hi Miquel,
>>>>
>>>> On 2/23/24 01:18, Miquel Raynal wrote:
>>>>> Hi William,
>>>>>
>>>>> william.zhang at broadcom.com wrote on Thu, 22 Feb 2024 19:47:57 -0800:
>>>>>     >>>> BCMBCA broadband SoC based board design does not specify ecc setting in
>>>>>> dts but rather use the SoC NAND strap info to obtain the ecc strength
>>>>>> and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for
>>>>>> this purpose and update driver to support this option. However these two
>>>>>> options can not be used at the same time.
>>>>>>
>>>>>> Signed-off-by: William Zhang <william.zhang at broadcom.com>
>>>>>> Reviewed-by: David Regan <dregan at broadcom.com>
>>>>>>    >>>
>>>>> FYI I did not receive patches 7, 8, 9, which makes the series numbering
>>>>> very odd.
>>>>>     >> I was using the get maintainer script mainly and it sends to the linux MTD list.  I will add your email directly next time.
>>>
>>> Yes, I prefer to be in Cc of the whole series, please.
>>>    
>> Sure.  And thanks for applying other patches.  Do you want me to just send a new single patch for the update?
> 
> Yes just the missing patch.
> 
v7 of this patch was sent early

>>>>>>     >> +static int brcmnand_get_sector_size_1k(struct brcmnand_host *host)
>>>>>> +{
>>>>>> +	struct brcmnand_controller *ctrl = host->ctrl;
>>>>>> +	int sector_size_bit = brcmnand_sector_1k_shift(ctrl);
>>>>>> +	u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
>>>>>> +						  BRCMNAND_CS_ACC_CONTROL);
>>>>>> +	u32 acc_control;
>>>>>> +
>>>>>> +	if (sector_size_bit < 0)
>>>>>> +		return 0;
>>>>>> +
>>>>>> +	acc_control = nand_readreg(ctrl, acc_control_offs);
>>>>>> +
>>>>>> +	return (acc_control & BIT(sector_size_bit)) >> sector_size_bit;
>>>>>
>>>>> FIELD_PREP, FIELD_GET, *please*.
>>>> You probably missed my reply to your comments on the same patch in v5. Here is the link for the post in case it lost in your email:
>>>> https://lore.kernel.org/lkml/c145b90c-e9f0-4d82-94cc-baf7bfda5954@gmail.com/T/#m1d911d2f119f3bd345c575a81b60bc2bd8c461eb
>>>
>>> I didn't miss it, but the reason does not sound legitimate to me.
>>> Please work on it, it will be so much cleaner.
>>>    
>> I understand FIELD_PREP/GET is the preferred way of linux accessing the register fields but it requires a constant MASK value and does not apply to our case as we have different versions of the register and have different mask.  There is way to workaround it. i.e defining the multiple constants directly and using these macros with if/else based on reg version. But it is not clean and since we already have helper functions that handle and return different shift/mask value, I see this is a perfect way for our situation and can adapt to future reg version change easily and cleanly.
>>
>>>> The mask is not constant here and cause build errors.
> 
> Which errors?
> 
If I use the code below In function brcmnand_get_sector_size_1k, inlined 
from brcmnand_get_ecc_settings at 
drivers/mtd/nand/raw/brcmnand/brcmnand.c:1089:24,
     inlined from brcmnand_setup_dev at 
drivers/mtd/nand/raw/brcmnand/brcmnand.c:2701:3:
././include/linux/compiler_types.h:442:38: error: call to 
compiletime_assert_254 declared with attribute error: FIELD_GET: mask is 
not  constant

> +       acc_control = nand_readreg(ctrl, acc_control_offs);
> +       return FIELD_GET(BIT(sector_size_bit), acc_control);
> 
> Does not return any error here.
> 
Right, this function does not return error. brcmnand_sector_1k_shift 
does. I didn't make that clear enough. This function is updated and 
logic that calls this function is simplified in v7 based on your feedbacks.


> Thanks,
> Miquèl
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4212 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20240229/c518f05b/attachment.p7s>