[PATCH 07/41] mtd: spi-nor: store .n_banks in struct spi_nor_flash_parameter

[Miquel Raynal]

Hi Michael,

mwalle at kernel.org wrote on Mon, 07 Aug 2023 15:21:01 +0200:

> First, fixups might want to replace the n_banks parameter, thus we need
> it in the (writable) parameter struct. Secondly, this way we can have a
> default in the core and just skip setting the n_banks in the flash_info
> database. Most of the flashes doesn't have more than one bank.
> 
> Signed-off-by: Michael Walle <mwalle at kernel.org>
> ---
>  drivers/mtd/spi-nor/core.c | 7 ++++---
>  drivers/mtd/spi-nor/core.h | 2 ++
>  2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 138bc1e0a67c..ea94fb0da1e5 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2861,7 +2861,7 @@ static void spi_nor_init_flags(struct spi_nor *nor)
>  	if (flags & NO_CHIP_ERASE)
>  		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
>  
> -	if (flags & SPI_NOR_RWW && nor->info->n_banks > 1 &&
> +	if (flags & SPI_NOR_RWW && nor->params->n_banks > 1 &&
>  	    !nor->controller_ops)
>  		nor->flags |= SNOR_F_RWW;
>  }
> @@ -2925,8 +2925,8 @@ static int spi_nor_late_init_params(struct spi_nor *nor)
>  	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
>  		spi_nor_init_default_locking_ops(nor);
>  
> -	if (nor->info->n_banks > 1)
> -		params->bank_size = div64_u64(params->size, nor->info->n_banks);
> +	if (params->n_banks > 1)
> +		params->bank_size = div64_u64(params->size, params->n_banks);
>  
>  	return 0;
>  }
> @@ -2996,6 +2996,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
>  	params->size = info->size;
>  	params->bank_size = params->size;
>  	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
> +	params->n_banks = info->n_banks;
>  
>  	if (!(info->flags & SPI_NOR_NO_FR)) {
>  		/* Default to Fast Read for DT and non-DT platform devices. */
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 25bc18197614..fe1ce232a6c8 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -358,6 +358,7 @@ struct spi_nor_otp {
>   *			in octal DTR mode.
>   * @rdsr_addr_nbytes:	dummy address bytes needed for Read Status Register
>   *			command in octal DTR mode.
> + * @n_banks:		the number of banks.

just "number of banks" would make it, but that's nitpicking.

>   * @n_dice:		number of dice in the flash memory.
>   * @vreg_offset:	volatile register offset for each die.
>   * @hwcaps:		describes the read and page program hardware
> @@ -394,6 +395,7 @@ struct spi_nor_flash_parameter {
>  	u8				addr_mode_nbytes;
>  	u8				rdsr_dummy;
>  	u8				rdsr_addr_nbytes;
> +	u8				n_banks;
>  	u8				n_dice;
>  	u32				*vreg_offset;
>  
> 

Reviewed-by: Miquel Raynal <miquel.raynal at bootlin.com>


Thanks,
Miquèl