[PATCH 08/41] mtd: spi-nor: default .n_banks to 1

[Michael Walle]

If .n_banks is not set in the flash_info database, the default value
should be 1. This way, we don't have to always set the .n_banks
parameter in flash_info.

Signed-off-by: Michael Walle <mwalle at kernel.org>
---
 drivers/mtd/spi-nor/core.c   | 3 +--
 drivers/mtd/spi-nor/core.h   | 8 ++++----
 drivers/mtd/spi-nor/xilinx.c | 1 -
 3 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index ea94fb0da1e5..015152ba8973 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2016,7 +2016,6 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
 
 static const struct flash_info spi_nor_generic_flash = {
 	.name = "spi-nor-generic",
-	.n_banks = 1,
 	.parse_sfdp = true,
 };
 
@@ -2996,7 +2995,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
 	params->size = info->size;
 	params->bank_size = params->size;
 	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
-	params->n_banks = info->n_banks;
+	params->n_banks = info->n_banks ?: SPI_NOR_DEFAULT_N_BANKS;
 
 	if (!(info->flags & SPI_NOR_NO_FR)) {
 		/* Default to Fast Read for DT and non-DT platform devices. */
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index fe1ce232a6c8..c90445e186c0 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -15,6 +15,7 @@
  * have the page size defined within their SFDP tables.
  */
 #define SPI_NOR_DEFAULT_PAGE_SIZE 256
+#define SPI_NOR_DEFAULT_N_BANKS 1
 
 /* Standard SPI NOR flash operations. */
 #define SPI_NOR_READID_OP(naddr, ndummy, buf, len)			\
@@ -453,7 +454,7 @@ struct spi_nor_fixups {
  * @size:           the size of the flash in bytes.
  * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
  *                  isn't necessarily called a "sector" by the vendor.
- * @n_banks:        the number of banks.
+ * @n_banks:        (optional) the number of banks. Defaults to 1.
  * @page_size:      (optional) the flash's page size. Defaults to 256.
  * @addr_nbytes:    number of address bytes to send.
  *
@@ -570,7 +571,7 @@ struct flash_info {
 /* Used when the "_ext_id" is two bytes at most */
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
 
 #define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks)	\
 	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
@@ -578,13 +579,12 @@ struct flash_info {
 
 #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 	SPI_NOR_ID6((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
 
 #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
 		.size = (_sector_size) * (_n_sectors),			\
 		.sector_size = (_sector_size),				\
 		.page_size = (_page_size),				\
-		.n_banks = 1,						\
 		.addr_nbytes = (_addr_nbytes),				\
 		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
 
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 284e2e4970ab..8d4539e32dfe 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -26,7 +26,6 @@
 		.size = 8 * (_page_size) * (_n_sectors),		\
 		.sector_size = (8 * (_page_size)),			\
 		.page_size = (_page_size),				\
-		.n_banks = 1,						\
 		.flags = SPI_NOR_NO_FR
 
 /* Xilinx S3AN share MFR with Atmel SPI NOR */

-- 
2.39.2