[PATCH v2 1/2] dt-bindings: mtd: spi-nor: Add reset-gpios property

[Sai Krishna Potthuri]

SPI-NOR flashes have RESET pin which can be toggled using GPIO
controller, for those platforms reset-gpios property can be used to
reset the flash device.

Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri at amd.com>
---
 Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 7149784a36ac..4e98f78be750 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -70,6 +70,12 @@ properties:
       be used on such systems, to denote the absence of a reliable reset
       mechanism.
 
+  reset-gpios:
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      If "broken-flash-reset" is present then having this property does not
+      make any difference.
+
   partitions:
     type: object
 
-- 
2.17.1