[PATCH 3/8] mtd: spi-nor: sfdp: Add support for SCCR map for multi-chip device
tkuw584924 at gmail.com
tkuw584924 at gmail.com
Fri Aug 5 23:34:21 PDT 2022
From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
SCCR map for multi-chip devices contains the number of additional dice in
the device and register offset values for each additional dice.
spi_nor_parse_sccr_mc() is added to determine the number of dice and
volatile register offset for each die. The volatile register offset table
may already be allocated and contains offset value for die-0 via SCCR map
parse. So, we should use devm_krealloc() to expand the table with
preserving die-0 offset.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
---
drivers/mtd/spi-nor/sfdp.c | 64 ++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index 3d612dc4c63c..8ef3b11fae49 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -26,6 +26,11 @@
* Status, Control and Configuration
* Register Map.
*/
+#define SFDP_SCCR_MAP_MC_ID 0xff88 /*
+ * Status, Control and Configuration
+ * Register Map Offsets for Multi-Chip
+ * SPI Memory Devices.
+ */
#define SFDP_SIGNATURE 0x50444653U
@@ -1242,6 +1247,61 @@ static int spi_nor_parse_sccr(struct spi_nor *nor,
return ret;
}
+/**
+ * spi_nor_parse_sccr_mc() - Parse the Status, Control and Configuration
+ * Register Map Offsets for Multi-Chip SPI Memory
+ * Devices.
+ * @nor: pointer to a 'struct spi_nor'
+ * @sccr_mc_header: pointer to the 'struct sfdp_parameter_header' describing
+ * the SCCR Map offsets table length and version.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_sccr_mc(struct spi_nor *nor,
+ const struct sfdp_parameter_header *sccr_mc_header)
+{
+ struct spi_nor_flash_parameter *params = nor->params;
+ u32 *dwords, addr;
+ size_t len;
+ int ret;
+ u8 i;
+
+ len = sccr_mc_header->length * sizeof(*dwords);
+ dwords = kmalloc(len, GFP_KERNEL);
+ if (!dwords)
+ return -ENOMEM;
+
+ addr = SFDP_PARAM_HEADER_PTP(sccr_mc_header);
+ ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+ if (ret)
+ goto out;
+
+ le32_to_cpu_array(dwords, sccr_mc_header->length);
+
+ /*
+ * Pair of DOWRDs (volatile and non-volatile register offsets) per
+ * additional die. Hence, length = 2 * (number of additional dice).
+ */
+ params->num_of_dice += sccr_mc_header->length / 2;
+
+ /* Address offset for volatile registers of additional dice */
+ params->vreg_offset =
+ devm_krealloc(nor->dev, params->vreg_offset,
+ params->num_of_dice * sizeof(*dwords),
+ GFP_KERNEL);
+ if (!params->vreg_offset) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ for (i = 1; i < params->num_of_dice; i++)
+ params->vreg_offset[i] = dwords[(i - 1) * 2];
+
+out:
+ kfree(dwords);
+ return ret;
+}
+
/**
* spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
* after SFDP has been parsed. Called only for flashes that define JESD216 SFDP
@@ -1424,6 +1484,10 @@ int spi_nor_parse_sfdp(struct spi_nor *nor)
err = spi_nor_parse_sccr(nor, param_header);
break;
+ case SFDP_SCCR_MAP_MC_ID:
+ err = spi_nor_parse_sccr_mc(nor, param_header);
+ break;
+
default:
break;
}
--
2.25.1
More information about the linux-mtd
mailing list