[PATCH 2/8] mtd: spi-nor: sfdp: Extract volatile register offset from SCCR map

[tkuw584924 at gmail.com]

From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>

The volatile register offset resides in the 1st DWORD of SCCR map. Allocate
the table and copy the offset value.

The table may be allocated when the SCCR map for multi-chip is parsed.
Since we cannot assume SCCR parse is always in ahead of SCCR multi-chip,
we need to check if the table is already allocated or not.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
---
 drivers/mtd/spi-nor/sfdp.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index 2257f1b4c2e2..3d612dc4c63c 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -1206,6 +1206,7 @@ static int spi_nor_parse_profile1(struct spi_nor *nor,
 static int spi_nor_parse_sccr(struct spi_nor *nor,
 			      const struct sfdp_parameter_header *sccr_header)
 {
+	struct spi_nor_flash_parameter *params = nor->params;
 	u32 *dwords, addr;
 	size_t len;
 	int ret;
@@ -1222,6 +1223,17 @@ static int spi_nor_parse_sccr(struct spi_nor *nor,
 
 	le32_to_cpu_array(dwords, sccr_header->length);
 
+	/* Address offset for volatile registers (die 0) */
+	if (!params->vreg_offset) {
+		params->vreg_offset = devm_kmalloc(nor->dev, sizeof(*dwords),
+						   GFP_KERNEL);
+		if (!params->vreg_offset) {
+			ret = -ENOMEM;
+			goto out;
+		}
+	}
+	params->vreg_offset[0] = dwords[0];
+
 	if (FIELD_GET(SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE, dwords[22]))
 		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
 
-- 
2.25.1