[PATCH] mtd: spinand: macronix: Add support for serial NAND flash

[Miquel Raynal]

On Thu, 2021-05-20 at 01:45:08 UTC, jaimeliao at mxic.com.tw wrote:
> From: Jaime Liao <jaimeliao at mxic.com.tw>
> 
> Macronix NAND Flash devices are available in different configurations
> and densities.
> 
> MX"35" means SPI NAND
> MX35"LF"/"UF" , LF means 3V and UF meands 1.8V
> MX35LF"2G" , 2G means 2Gbits
> MX35LF2G"E4"/"24"/"14",
> E4 means internal ECC and Quad I/O(x4)
> 24 means 8-bit ecc requirement and Quad I/O(x4)
> 14 means 4-bit ecc requirement and Quad I/O(x4)
> 
> MX35LF2G14AC is 3V 2Gbit serial NAND flash device
> (without on-die ECC)
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7926/MX35LF2G14AC,%203V,%202Gb,%20v1.1.pdf
> 
> MX35UF4G24AD is 1.8V 4Gbit serial NAND flash device
> (without on-die ECC)
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7980/MX35UF4G24AD,%201.8V,%204Gb,%20v0.00.pdf
> 
> MX35UF4GE4AD/MX35UF2GE4AD are 1.8V 4G/2Gbit serial
> NAND flash device with 8-bit on-die ECC
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7983/MX35UF4GE4AD,%201.8V,%204Gb,%20v0.00.pdf
> 
> MX35UF2GE4AC/MX35UF1GE4AC are 1.8V 2G/1Gbit serial
> NAND flash device with 8-bit on-die ECC
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7974/MX35UF2GE4AC,%201.8V,%202Gb,%20v1.0.pdf
> 
> MX35UF2G14AC/MX35UF1G14AC are 1.8V 2G/1Gbit serial
> NAND flash device (without on-die ECC)
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7931/MX35UF2G14AC,%201.8V,%202Gb,%20v1.1.pdf
> 
> Validated via normal(default) and QUAD mode by read, erase, read back,
> on Xilinx Zynq PicoZed FPGA board which included Macronix
> SPI Host(drivers/spi/spi-mxic.c).
> 
> Signed-off-by: Jaime Liao <jaimeliao at mxic.com.tw>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel